Datasheet

Complete drawings can be found on pages 81-83
Thumbwheels
• CA14. This thumbwheel is available in different colors. It can also
be provided in accordance with UL 94 V-0.
Potentiometers can be supplied with thumbwheels already inserted
in. ACP can also study special requests for thumbwheels.
• CE14. This thumbwheel in accordance with UL 94 V-0 is avail-
able in different colors.
Potentiometers can be supplied with thumbwheels already inserted
in. ACP can also study special requests for thumbwheels.
14003
Terminals
By default, terminals are always straight for the 14mm size, as shown on the “models” menu.
ACP can provide crimped terminals (with “snap in”), to better hold the component to the board prior to soldering.
1
1,8
R1,5
1,5
0.9
SNP SNR
Adjustment possibilities
ACP’s potentiometers can be adjusted through either the front side (WT) or the collector side (WTI):
WTI
Collector side
WT
Front side
WTI
Collector side
WT
Front side
Potentiometers with cut track
The resistive element in this potentiometer has an area with very high resistive values, resulting in an open circuit. Recommended for
lighting regulation.
With cut at the beginning of the track CCW: Off-On.
With cut at the end of track- CW: On-Off. Others position available on request.
AB
C
CCW: Off-On CW: On-Off
AB
C
200 (models with * : 150)
100
75
H2,5 - H4 - H5 - HA5 - HL5 -HC0 - H0
V12,5 - VA12,5 - VL12,5 - V15 - V17,5* - VD11*
VD7,5 - VR12,5
- (only potentiometers)
14003, 14117, 14042
14008, 14015, 14250, 14187, 14056, 14065
14066, 14067, 14072, 14073, 14081, 14084
Packaging
Bulk packaging: Potentiometers are fi rst bagged and then introduced in boxes:
Potentiometer model + Shaft or thumbwheel inserted Pieces per box (130 x 60 x 90)
Tape and reel (T&R) packaging will be available for SMD confi gurations, on request.
|
www.acptechnologies.com
|
33
Weltron Elektronik GmbH - Phone: [phone] Fax: [phone] E-Mail: [e-mail] Internet: www.weltron.de
Weltron Elektronik GmbH - Phone: [phone] Fax: [phone] E-Mail: [e-mail] Internet: www.weltron.de