Service manual
34
Quick Start Reference Guide
Refer to Product Safety Manual for Safety Statements. Complete Owner’s Manual available online
Changing User Options
There are several option you can change to customize the operation of the oven for your business. The table below shows these
options; the factory setting is shown in bold type.
3. Choose option by turning dial to highlight desired option. Press knob and the next option will be highlighted.
CLEAN FILTER
When this message displays, clean the
Cleaning the air
lter will not shut off the message.
The message will automatically stop
displaying after 24 hours.
Depending on microwave use and
may need to be cleaned more or
is determined, set the option for the
appropriate time frame.
regularly to prevent overheating of the
complete cleaning instructions.
High Speed Commercial Combination Oven
KEYPAD
Option # Setting Name Options
Single digit entry
1 Digit Entry
Double digit entry
1 Level
2 Levels
2 Menu Setting
3 Levels
Manual cooking allowed
3 Manual Lock
Manual cooking not allowed
Changes to programs allowed
4 Program Lock
Password needed
Opening door resets timer 5 Door Open
Opening door pauses cook cycle
Off6 Keybeep
On
Low
Medium
7 Keybeep Volume
High
Continuous until door is opened
Three beeps once
8 End of Cycle Beep
Three beeps repeating
Off
30 Seconds
60 Seconds
9 Keyboard Window
120 Seconds
Off10 Preheat Warnings
Warn if oven not at temp
Degrees F
11 Temperature Scale
Degrees C
Off
Displays every 7 days
Displays every 30 days
12 Clean Filter
Displays every 90 days
From Preheat, go to Ready 13 Auto Menu
From Preheat, go to Menu
No individual tube programming
14 Magnetron Control
Individual Tube Programming
No microwave only mode
15 Microwave Only Mode
Allow microwave only mode
Do not save after manual cook 16 Manual Program Save
Save after manual cook
2 Hours
4 Hours
8 Hours
17 Automatic Shut Off
Disable
Begin Transfer: Card to Oven
18 Data Transfer
Begin Transfer: Oven to Card