Technical Specifications

Product Name
Fasäde Decorative Thermoplastic Panels
Manufacturer’s Name
Acoustic Ceiling Products (ACP)
September 28, 2007 Page 5
PRODUCT DESCRIPTION
■ Prepare substrate surface with primer.
■ Apply adhesive to substrate using a notched trowel. If a tube adhesive is used,
repeated pressing of tiles to substrate may be required.
■ Install J-Trim (if used), and border panels. Install full panels, working across the
room.
■ Overlap adjacent tiles 9 mm (3/8 inch) until ridges and dots align.
■ Once completed, firmly press all ceiling tiles to ensure proper adhesive bond.
○ T-bar panel Mount:
■ If grid covers are used, install them prior to installing panels. Refer to GridMax
installation instructions.
■ Install border panels (if used), and install full panels working across the room.
■ To cut panels, measure distance between t-bar centers, or between the t-bar center
and closest edge of wall molding.
■ If hold-down clips are used, reach over the installed panel and snap over grid
members.
■ Glue 610 x 1220 mm (24 x 48 inch) panels in center, to prevent sagging.
○ Contact manufacturer for detailed installation guide.
• MAINTENANCE INSTRUCTIONS AND PROCEDURES
○ Clean with mild soap and water.
○ On a daily basis, moderate dust or vacuum clean with a soft, clean brush attachment.
○ On a weekly basis, provide manual wet cleaning.
Corporate Identification
Acoustic Ceiling Products, LLC.
P.O. Box 1581
Appleton, WI, U.S.A. 54912-1581
Phone - Toll Free: 1-800-434-3750
Fax - Toll Free: 1-800-434-3751
E-mail to: [e-mail]
Web site: www.acpideas.com
Technical Services Available
Products available nationally and from regional representatives.
Classification and Filing
MasterFormat 1995
Section 09510 - PVC Ceiling Panels