Technical Specifications

Product Name
Fasäde Decorative Thermoplastic Panels
Manufacturer’s Name
Acoustic Ceiling Products (ACP)
September 28, 2007 Page 4
PRODUCT DESCRIPTION
□ Rosette
□ Flat
□ Border Fill
■ Backsplash - 450 x 600 mm (18 x 24 inch):
□ Traditional 1
□ Traditional 4
□ Rib 1
□ MiniQuattro
□ Quilted
□ Hammered
□ Traditional 6
■ Wall Panel - 1220 x 2440 mm (48 x 96 inch):
□ Traditional 1
□ Traditional 2
□ Quilted
□ Dome
□ Quattro
□ Rib
□ Diamond Plate
• OPTIONS
○ Border Fill panels (for use where partial panels are required around the perimeter of a room,
and indented panels cannot be cut in the middle).
○ Lay-In Panels: ACP HG-Grid suspended grid.
○ Grid Covers: ACP GridMAX, finished to match panel styles and colors.
○ J-Trim, to finish wall edges; colors available to match all finishes.
PRODUCT PLACEMENT
• PREPARATION WORK
○ Perform installation as late as possible in the building process after any dust generating
activities have been completed.
○ Install grid in accordance with grid installation instructions.
• INSTALLATION / ERECTION
○ Plan room layout providing equal border widths on each side of room, in both directions.
○ Cutting Panels: Using a utility knife and straight edge, score the finish side of the panel.
Bend panel at the score mark and snap apart.
○ Surface Mounting: