Technical Specifications

Product Name
CeilingMAX
Manufacturer’s Name
Acoustic Ceiling Products, L.L.C.
July 22, 2008 Page 4
 Standard Colors: White 00 - Gloss Black 01 - Platinum 02 - Antique White 03 - Brass 04
- Chrome 05 - Woodgrain 06 - Satin Black 07 – Brushed Aluminum 08
 Custom Colors: Contact manufacturer for colors
 Hot Foil Stamp
 Patterns: Custom upon request.
PRODUCT PLACEMENT
• PREPARATION WORK
 Perform installation as late as possible in the building process after any dust generating
activities have been completed.
 Examine surface for soundness of connections and ensure that surfaces are level enough
to accept grid fastening.
• INSTALLATION / ERECTION
 Install wall bracket around perimeter of room directly beneath the joist or finished
ceiling. Gypsum board screws to be installed at 407 – 610 mm (16 – 24 inches) on
center; Miter corners.
 Establish alignment to have equal amounts of tile on opposite sides of the room.
 Fasten top hanger by running top hanger into the wall bracket with screws. Install one
screw per joist or 407 – 610 mm (16 – 24 inches) on center.
 Install cross tees between top hangers using the cross tee as your measuring device.
Screw the next row of top hangers in parallel to previous row and continue until room is
complete.
 Cut and place border ceiling tiles first and install final cross tees.
 Snap Runner into center channel of top hanger to finish the ceiling.
 Contact manufacture for detailed installation guide.
Grid Member Profile Grid Interface Options for Associated Acoustic Panels
Cross Tee Joint Grid Accessory Options