Integrated Amplifiers
Contents IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth. 7) Do not block any ventilation openings. Install in accordance with manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
Power CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. Each of our designs is engineered to accurately reproduce the sound of acoustic and electric instruments, delivering flat frequency response across the entire musical spectrum; extended, tight, well-controlled bass; and complete clarity of sound reproduction.
-10 dB MIC ATTEN the push button switch located next to the connector. To avoid an audible “pop”, set the mic input level control all the way off when switching on the phantom power. An LED indicates when phantom power is on. The two channels of the Clarus+ can be blended to mix two instruments, 2 microphones or a mic and an instrument thereby performing much like a small PA system.
CH 2 FX RETURN HEADPHONE OUTPUT FX RTN LEVEL on/off switch to turn on the filter. Start with the control fully counterclockwise and gradually turn it clockwise until the desired effect is achieved. Experiment with the position of the control to give you the sound you like best. H/P AMP The phase reverse switch is used to reduce feedback and to control phase interactions between the two channels. If you are using two pickups or a mic and a pickup, you will find the phase reverse switch to come in handy.
Mute Switch A switch is provided to allow you to mute the output of the amplifier without having to turn the amp off. This will allow you to tune your instrument on stage without being heard. The amp output and direct out signals are both muted by the switch. The mute switch has a red button on it to remind you that it is an important switch. If you are not getting any sound out of the amp, check to make sure that the mute switch is off.
FCC Compliance Notice Warranty and Repair We stand behind our products with a full warranty of five years from the date of purchase. Should a problem arise, please call us before returning your amplifier or enclosure. Naturally, our warranty does not cover products that have been damaged through misuse. Be sure to check our web site regularly, we have an FAQ section and we post helpful information for getting the most out of your Acoustic Image product.
CLARUS 1 TM SERIES III Model 500 IA TM CLARUS+ Model 550 IA © 2010 Acoustic Image LLC
