Specifications

Chapter 2 7KT400 BIOS Setup
2-53
Super IO Device
Press Enter on this item to open the Sub-menu as shown below:
Onboard FDC Controller Enabled
Onboard Serial Port 1 3F8/IRQ4
Onboard Serial Port 2 2F8/IRQ3
UART Mode Select Normal
RxD, TxD Active Hi, Lo
IR Transmission Delay Enabled
UR2 Duplex Mode Half
Use IR Pins IR-Rx2Tx2
Onboard Parallel Port 378/IRQ7
Parallel Port Mode ECP
EPP Mode Select EPP1.7
ECP Mode Use DMA 3
Game Port Address 201
MIDI Port Address 330
MIDI Port IRQ 10
Item Help
VIA OnChip IDE Device
Phoenix - AwardBIOS CMOS Setup Utility
←→↑↓: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Onboard FDC Controller
The choices: Enabled; Disbled
Onboard Serial Port 1/2
Select an address and corresponding interrupt for the first and
second serial ports.
The Choices: Auto; 3F8/IRQ4; 2F8/IRQ3; 3E8/IRQ4;2E8/
IRQ3; Disabled.