Specifications

Chapter 2 7KT400 BIOS Setup
2-50
USB 2.0 Support
Use this item to enable or disable the USB 2.0 support.
The Choices: Enabled (default); Disabled
OnChip IDE Channel0
This item is to enable / disable the IDE Primary Master/Slave
channel.
The choices: Enabled; Disabled
OnChip IDE Channel1
This item is to enable / disable the IDE Secondary Master/Slave
channel.
The choices: Enabled; Disabled
VIA OnChip IDE Device
Press Enter on this item to open the Sub-menu as shown below:
OnChip IDE Channel0 Enabled
OnChip IDE Channel1 Enabled
IDE Prefetch Mode Enabled
Primary Master PIO Auto
Primary Slave PIO Auto
Secondary Master PIO Auto
Secondary Slave PIO Auto
Primary Master UDMA Auto
Primary Slave UDMA Auto
Secondary Master UDMA Auto
Secondary Slave UDMA Auto
Item Help
VIA OnChip IDE Device
Phoenix - AwardBIOS CMOS Setup Utility
←→↑↓: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
IDE Prefetch Mode
This item is to enable / disable the IDE Prefetch Mode. If enabled,
data will be prefetched into buffer during data access.
The choices: Enabled; Disabled