Specifications

1-19
Chapter 1 Motherboard 7KT400
SMI Suspend Switch Lead
The connector can be connected to a reset switch. Press this
reset switch to restart system.
This allows the user to manually place the system into the
Suspend Green mode . System activity will be instantly
decreased to save electricity and expand the life of certain
components when the system is not in use. This 2-pin connector
(see the figure) connects to the case-mounted suspend switch.
If you do not have a switch for the connector, you may use the
"Turbo Switch” instead since it does not have a function. If
you want to use this connector, the "Suspend Switch" in the
Power Management Setup of the BIOS SOFTWARE section
should be enabled.
Reset Switch Lead (RST)