Service manual

Chapter 2 E20 Specification
FileStore Service Manual 32
2.3 Operation
When the E20 is connected to a FileStore E01 and powered up, the FileStore E01 recognises
the hard disc. The FileStore unit, comprising the FileStore E01 and E20, then starts up in
network mode, ready for use.
2.3.1 Controls
Power on/off switch On rear panel
2.3.2 Indicators
Green LED Power on indicator
Red LED Drive active
2.4 Host Adaptor
SCSI to 2MHz FileStore expansion bus
2.5 FileStore E20 Expansion Input/ Output Ports
FileStore Expansion Bus 37 way D-Type Rear Panel 2 off
Mains in Hard wired-in connection
SCSI Interface Internal
2.5.1 The FileStore E20 expansion bus connector
The E20 unit is equipped with two expansion bus connectors, for connecting to the E01 and
an (optional) second 2MHz bus device. The connection to the E01 unit is made with the
supplied FileStore Expansion Bus Cable.