Service manual

Appendix A Test Equipment
FileStore Service Manual 109
FServCMOS
Select ‗N‘ from FServMenu. This invokes FServCMOS, the FileStore non-volatile (CMOS)
RAM editor and displays the following menu:
Edit non – volatile RAM
&0E Station number = 254 OK
&14 Last error was &04, X=&84, Y=&00 at &02C0 S.I.N. = &FFFFFF
&1C MaxUser = 80
&1D MaxDrive = 4
&1E Printer is ―Puce<00><00>‖
&30 PrPage is off
&24 FSUser is ―SYST<00><00><00><00><00><00><00>‖ check is &54 OK
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F ASCII data
00 FE 01 ..
10 00 00 00 00 04 84 00 C0 02 FF FF FF 50 05 50 75 …………..P.Pu
20 63 65 00 00 53 59 53 54 00 00 00 00 00 00 00 54 ce..SYST…..T
30 4E 00 00 00 00 04 00 40 20 44 00 00 FC 00 04 00 N……@ D………
The editor reads a CMOS RAM address (in the range &E to &3F) and then prompts for a
new value, which it writes at that address. It is possible to leave the CMOS RAM in an
inconsistent state, as some of the entries are check summed. You are warned if this happens.
Many of the fields of the CMOS RAM have FileStore commands to alter their contents: there
are the station number, MaxUsers, MaxDrivers, the printer port name, PrPage, and FSUser.