User guide

Appendix 3: COMMAND SUMMARIES
Some specialist FileStore commands are available directly from the
NETMGR screen (after you have logged on as SYST). Other commands are
accessible by first pressing SYSTEM from the NETMGR screen.
FileStore can operate in two modes: user mode and maintenance mode. A
different set of commands is available in each mode.
FileStore commands can be typed as capitals or small letters (or even a
mixture of both) — they are equivalent. When a command is followed by
other information, it should be separated from it by one or more spaces.
User mode 
To use user mode commands, FileStore must be in user mode (running
commands 
normally) and you must be logged on as SYST (or another privileged user).
The main management facility provided is used by selecting the NETMGR
task from the main menu. This provides the following functions, accessed by
pressing function keys:
COPY — copy files/directories
WIPE — wipe a directory
TREE — print a directory tree
NEW USER — create a user
DEL USER — delete a user id
In addition to this, there is a wide range of simpler facilities, used by typing
command names in Communicator's system mode (ie after pressing SYSTEM
within NETMGR), as follows.
Commands shown in small letters below are reserved for the manager's use
and described in detail within Chapter 3. For details of the other commands,
see the Communicator User Guide.
*ACCESS —
change the owner's access and others' access to a file or directory
*BYE — log off
*CAT — list the contents of a directory
*CDIR — create a directory

Appendix 3: COMMAND SUMMARIES 
73