User guide

If you have more than one FileStore on your Econet, they may be trying to
log on to the wrong one.
(To add a user, see Adding a user, in Chapter 3.)
Who are you?
A user has tried to use a FileStore command before logging on, or after
FileStore has been shut down and then started up again. The user should log
on again.
Wrong password
A user has tried to log on but not typed the correct password to go with their
user id. Check the user's typing. The password file may be out of date if you
have had to use a backup because the working version became damaged.
If the user cannot remember the password, remove their id using NETMGR
(see, Removing a user,
in Chapter 3), remembering not to delete the user's
files, then add them again using the same id (see Adding
a user in Chapter 3).
The user should then log on (they won't need any password), select BASIC
and define a password by using
*PASS uu
passwd.
Selecting 
If you are unable to start FileStore because of a problem, try this alternative
maintenance 
method:
mode — alternative

1. Open the access flap then turn it on.
method
2.
Select the main menu on the Communicator.
3. Press the LOGON key.
4.
In reply to the prompt:
User name :
Type:
id
where id
is the maintenance mode id.
5. In reply to the prompt:
Password :
Type:
<- 1
70 
Appendix 2: DEALING WITH PROBELMS