User guide

the *CAT
command or NETMGR task's TREE option to check the name
and where it is.
Not listening
FileStore has not responded to the command the user just typed. The user
should try at least two more times, as FileStore may simply be too busy to
respond at the moment. If the problem persists:
1.
Check that FileStore is still turned on, plugged into Econet and in user
mode.
2.
If the user was trying to log on, check the file server number stored in
their Communicator, by selecting the Configure task. This should be
the same as FileStore's station id or 254. If not, change it.
3.
If the user was trying to print using FileStore's printer, check that they
have spelled the printer name correctly (using the Configure task). The
printer name is normally PRINT, but you may have changed this by
using the *PRNAME command.
Not open for update
Program error.
Password file corrupted
The password file (on the Library disc) is damaged. If the Library disc is on a
floppy disc:
1.
Open the access flap:
2.
Put the Library disc in the righthand drive.
3.
Put the latest backup of the Library disc in the lefthand drive.
4.
Close the access flap.
5.
Log on as SYST, and use NETMGR's COPY command to copy the
$.PASSWORD file to :titl
e.$.PASSWORD where title
is the title of
the Library disc. (See Copying
files and directories,
in Chapter 3.)
6.
Open the access flap.
7.
Remove the backup disc.
8.
Put the Library disc back in the lefthand drive and the usual data disc in
the righthand drive.
9.
Start up again.
68

Appendix 2: DEALING WITH PROBELMS