User guide

The function of each of these features will be introduced where relevant,
below.
Siting FileStore 
The first stage in getting FileStore ready for use is to connect it to mains
power and Econet.
First, choose where to site FileStore. There are four main points that will
decide this:
Location
FileStore must be located in a dry, clean environment. It must be positioned
upright, level, on a flat and stable surface, away from direct sunlight and
extremes of temperature.
Access to Econet
FileStore must be connected to the Econet it is serving through an Econet
user socket box, so it must be positioned within approximately 18 inches of
one of these, or you must arrange a socket box to suit.
Security
One of the main ways to prevent people from interfering with FileStore is to
restrict access to the unit. The most secure environment is of course an
unstaffed locked room.
Ease of access
You will probably need to get at FileStore several times a day, for simple
routine tasks. Other users will also need access to the printer, if one is
connected.

Appendix 1: INSTALLING FILESTORE 
43