User guide
4.
After approximately two minutes, the message
Disc formatted
should appear on your screen. If you see a different message or no
message is displayed after 5 minutes, check what to do next by referring
to Appendix 2.
5.
You can now remove the disc by pressing the disc drive eject button.
Write the disc's title on its label.
6.
To format another disc, repeat steps 2 to 5.
Adding a user
When you want to allow a new person to use FileStore:
1.
Select the NETMGR task and then select as current disc the disc that
you want to create their user directory on (see
Selecting
NETMGR).
2.
Press the NEW USER key. This will display the following:
Name of new user
3.
Type the user identity that the user will type to log on, followed by
I. This may be up to 10 characters long.
4.
If the user identity is accepted, after a short delay the display will show:
id is now a user
Press SPACE to return to menu
5.
Press the spacebar to return to the initial NETMGR screen.
Removing a user
To remove a user's id and directory:
1.
Select NETMGR (see
Selecting
NETMGR).
2.
Select the disc containing their directory as the current disc (see
Selecting
NETMGR).
3.
Press the DEL USER key. This will produce the prompt:
Name of user to be removed
4.
Type the user identity that you want to remove, followed by I <-1 I. The
screen will show:
Removing files....
3 MANAGEMENT FACILITIES: ROUTINE TASKS
19