User guide

without letting FileStore
know you have
finished. To continue the filing analogy
used earlier, logging off is like locking your filing cabinet.
To log off, either:
1.
Select BASIC from the main menu.
2. Type:
*BYE IF
OR
1. Turn your Communicator off.
Once you have logged off, if you attempt to use a FileStore command, you
will get the error message
Who are you?
Starting up 
At
the start of the day, FileStore will usually be
turned
off. To get it ready for users,
all you should need to do is
turn it on,
as follows:
1.
If you have a hard disc unit, turn that on first.
2.
If you have a printer, turn that on next.
3.
If you are going to use the floppy disc drives, insert the 'Library disc' in
the lefthand drive and the main 'data disc' in the righthand drive.
4.
Close the access flap.
5.
Turn on the main FileStore unit.
After
a delay of approximately one minute, the drive activity lights should stop
flickering, showing that FileS
tore is ready
for use.
To make sure that all is well, go to a Communicator station connected to the
Econet and log on as BOOT (or some other name in common, use), ie:
6.
Press Imp I to select the main menu.
7.
Press LOGON.
8.
In reply to the prompt:
User name :
Type:
BOOT
16 
3 MANAGEMENT FACILITIES: ROUTINE TASKS