User guide

3 MANAGEMENT FACILITIES :
ROUTINE TASKS
Logging on 
You need to log on to FileStore to
use it, after starting it up, changing discs, entering
maintenance mode, or logging off.
To log on:
1.
Select the main menu.
2.
Press LOGON and the following prompt will be displayed:
User name :
3.
Type the id that you want to use, followed by I - 
I. For example:
SYST
If
your system has more than one FileStore unit, the Communicator will be
configured to use just one of them.
To use a different FileStore unit you must
know
its station number. Either use Configure to change the FileStore station number to
this, or type
the station number before the id, separating them by a space. For
example:
252 SYST  <--J
This will produce the prompt:
Password :
4.
Type the password that goes with the id you've just typed followed by
r  1,
or just I F I if there is no password for that id.
The password will be displayed as hyphens, to help prevent others learning
your password.
If you want to use a different id log on using that. You don't have to log off first.
Lowing off  You should log off if you are not going to use FileStore for a while. Logging off will
ensure that all the work you have done will be saved securely on the disc storage you
are using.
Logging off is also important to ensure that other users cannot gain unauthorised
access to information you are using - as they could do if you leave your terminal
3 MANAGEMENT FACILITIES: ROUTINE TASKS

15