User guide

that must be done while FileStore is not running, but in a special mode called

`maintenance mode'. These tasks are:

—

Formatting discs.

—

Changing FileStore's station number.

—

Changing FileStore's maintenance id.

—

Changing the FileStore printer name.

—

Changing the number of active drives.

—

Changing the maximum number of users.

See Chapter 3 for instructions on how to enter maintenance mode.

The only tasks that you are likely to do regularly are formatting discs (for

taking extra backups of files or when you need extra user discs) and changing

the FileStore maintenance id (to keep the system secure).

While FileStore is in maintenance mode, other users cannot use it. This

means that you should, if possible, only perform these tasks while other users

do not want to use FileStore.

Indicator lamps



The two lamps on the front panel tell you how FileStore is operating (see

diagrams on pages 40 and 43):

—

Power light on and mode light off — normal state.

—

Power light on, mode light flashing slowly — waiting state.

You may switch the FileStore off or close the front access door to start the

FileStore.

—

Power light on, mode light flashing quickly — FileStore has encountered a

serious error. See page 60.

—

Both lights off — FileStore turned off.

—

Power light and mode light on — maintenance mode.



2 THE FILESTORE MANAGER'S ROLE