User Manual
Ⅰ. Over Voltage Disconnect Voltage>Over charging protection voltage(Protection
Circuit Modules(BMS))+0.2V※;
Ⅱ. Over Voltage Disconnect Voltage>Over Voltage Reconnect Voltage＝Charging
Limit Voltage ≥ Equalize Charging Voltage＝Boost Charging Voltage ≥ Float
Charging Voltage>Boost Reconnect Charging Voltage;
Ⅲ. Low Voltage Reconnect Voltage>Low Voltage Disconnect Voltage ≥ Discharging
Limit Voltage;
Ⅳ. Under Voltage Warning Reconnect Voltage>Under Voltage Warning Voltage≥
Discharging Limit Voltage;
Ⅴ. Boost Reconnect Charging voltage> Low Voltage Reconnect Voltage;
Ⅵ. Low Voltage Disconnect Voltage ≥ Over discharging protection voltage
(BMS)+0.2V※.
WARNING: The voltage parameters of lithium battery can be set, but you
must refer to the voltage parameters of lithium battery BMS.
WARNING: The required accuracy of BMS shall be at least 0.2V. If the
deviation is higher than 0.2V, the manufacturer will assume no liability for
any system malfunction caused by this.
4.1.3 Settings
1) PC setting
Connection
Download software
http://www.acopower.com
2) APP software setting
01 02 03 04 05 06 07
08 09 10 11 12 13 14 15 16 17
18
19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36