Installation guide

Index
ARX-1000 Hardware Installation Guide Index - 49
A
audience for this manual 1-3
B
Bezel A-41
Booting the switch 3-22
C
Cabling the client/server ports 2-17
Chassis installation
safety instructions 2-13
tools required 2-13
Configuring the switch 3-22
Connecting serial console port 3-21
Connecting the management port 3-32
Console connection to switch 3-22
Console port
baud rate 3-21
connecting 3-21
D
Diagnostics at switch bootup 4-35
Disk drives
removing and replacing A-41
F
Front bezel A-41
FRUs
and static electricity A-44
disk drive A-41
I
IDE hard drive
LEDs 4-39
L
LEDs
conditions and blinking patterns 4-38
front panel (fig.) 4-38
port/link LEDs 4-39
system status and alert 4-38
M
Management port 3-21
connecting 3-32
MGMT interface
location on the ARX1000 3-21
O
Operational status LEDs 4-38
P
Ports
LEDs 4-39
management, console 3-21
POST diagnostics 4-35
Power cords
attaching 2-17
Powering up the switch 2-17
R
Rack-mounting the switch 2-15
Removing and replacing a disk drive A-41
Running the boot wizard 3-22
S
Safety instructions 2-13
Serial console port 3-21
Site and safety considerations 2-13
Static electricity A-44
Status indicators (LEDs) 4-38
Status LEDs 4-38
Switch boot-up 3-22
for a redundant switch 3-27
for a replacement switch 3-24
Switch Installation
unpacking and installing the chassis 2-11
Switch installation
See Also Switch boot-up.
safety instructions 2-13
tools required 2-13
Switch LEDs (fig.) 4-38
Switch management ports 3-21
Switch replacement
See Switch Installation and Switch boot-up:for a
replacement switch.
T
Tools for installation 2-13
U
Unpacking the switch 2-14