Installation guide
Table Of Contents
- Table of Contents
- Introduction
- Unpacking and Installing the Switch
- Connecting the Switch to the Network
- Maintenance
- Removing a Hard Disk
- Index
Booting the Switch
ARX-1000 Hardware Installation Guide 3 - 31
SWITCH(cfg)# clock timezone America New_York
SWITCH(cfg)# hostname gffstnA
gffstnA(cfg)# ip domain-list wwmed.com
gffstnA(cfg)# ...
gffstnA(cfg)# exit
gffstnA#
If you copied the private subnet and mask from the defunct switch, this
completes the switch replacement. Otherwise, the new switch learns its
private subnet from its peer, re-configures itself, and reboots. (A reboot is
necessary to change the private subnet of an ARX.)
See the ARX
®
CLI Network-Management Guide for detailed configuration
instructions.