Installation guide

Management Interfaces
ARX
®
6000 Hardware Installation Guide 7 - 3
Management Interfaces
The System Control Module (SCM) provides the following management
ports:
• Console - a serial Console port for connecting a console terminal, and
• MGMT - a 10/100 Ethernet port for an out-of-band (OOB) management
station.
During the initial-boot process described in this chapter, you can only access
the serial Console port. You configure the OOB management port
(“MGMT”) as part of the procedures in this chapter.
Connecting the Console Terminal
Set the following console-terminal parameters to match those on the SCM’s
Console port:
• 9600 baud rate (default)
• XON-XOFF flow control
• 8 data bits
• 1 stop bit, no parity
serial Console (RJ-45)
OOB management (RJ-45)