Installation guide

Cabling the Modules
ARX
®
6000 Hardware Installation Guide 6 - 13
Once initial boot-up has occurred, the fan speed automatically regulates for
the appropriate cooling requirement based on ambient temperature.
Cabling the Modules
You can cable the modules before or after the switch is connected to the
network. For console connection and switch-boot information, see Chapter
7, Connecting the Switch to the Network.
Module cables (except the console cable) are supplied by the customer. For
cable specifications and requirements for each of the module types, see
Power Cord and Cable Requirements
, on page 5-5. describes cable
connector and pinout information.
Air Filter and Cable Management
The chassis is shipped with the air filter installed. The accessory kit contains
the air filter panel/cable guide which covers the air filter tray and provides
guides at each end for cable management.
Figure 6.7 Cable Guide
Captive Screw Captive Screw