Installation guide

Attaching the Power Cords
ARX
®
6000 Hardware Installation Guide 6 - 11
2. Align the clips (on back of bezel) with the pins at the top and
bottom on the utility bay.
3. Gently push the bezel down over the pins until it clicks into place
top and bottom.
Attaching the Power Cords
To attach the AC power cords to the chassis:
1. Locate the power ON/OFF toggle switches on the back of the
chassis and ensure they are set to the OFF position.
2. For a chassis with only one power supply, attach the power cord to
the right plug.
3. For a chassis with two power supplies, attach a power cord to each
plug.
Bezel Pins
(upper and lower,
2 each side)