Installation guide

Chapter 6
Unpacking and Installing the Chassis
6 - 6
5. Remove the small box inside. This contains the accessories
described in Table 6.1
.
6. Slowly slide/lift the outer carton up and away from around the
chassis, which sits in foam packaging on the pallet.
7. Remove the foam packaging from the bottom front and back of the
chassis.
Before you install the chassis into a rack, it is recommended that you remove
the fan tray and power supplies to facilitate handling and ease
rack-mounting. These components are particularly heavy. You can replace
these units after the chassis is secured in the rack, as shown in the next
section.