Installation guide

System Specifications
ARX
®
6000 Hardware Installation Guide 5 - 3
System Specifications
Table 5.1 describes the ARX
®
system specifications.
Component Specification
Chassis Dimensions
(includes fan tray and front bezel)
Height: 22.75 in.
Width: 19.00 in. (including the fixed mounting ears)
Depth: 23.00 in.
Chassis Weight
(includes fan tray, 2 disk drives,
1 power supply, 3 modules)
150 lb (68.04 kg)
Chassis / Power Supply
Environmental Requirements
Altitude: -200 ft. (-60 m) min. to 8000 ft. (2500 m) max.
Humidity —
Operating: 5 % min. to 95% max. (non condensing)
Storage: 5% to 95%
Temperature —
Operating: 32 deg. to 104 deg. F (0 deg. to 40 deg. C)
Storage: -40 deg. to 149 deg. F (-20 deg. to 65 deg. C)
Power Supply Power Input voltage: 220 Vac
Output voltage: -48 Vdc
3000 W maximum total DC power per chassis (Note: only 1500 W power is
used; the 3000 W accounts for redundant power supplies. Due to the 88%
efficiency of the drives, 1704 W input is required to achieve the maximum
1500 W output.)
Fan Tray Dimensions (includes
outer bezel)
Height: 4.88 in. (12.40 cm)
Width: 17.25 in. (43.82 cm)
Depth: 18 in. (45.72 cm)
Fan Tray Power Input voltage: 48 Vdc (6 fans)
Max. input current: 4 A
Airflow Clearance Minimum clearance of 12 inches (30.48 cm) required for air intake from
bottom front of chassis and exit through the top back (and side) of chassis to
maintain proper venting and prevent overheating.
Air Filter Height: 0.25 in. (0.635 cm)
Width: 11 in. (27.94 cm)
Depth: 20 in. (50.8 cm)
Table 5.1 System and Module Specifications