Installation guide

1-2 ARX®1000 Hardware Installation Guide
L
LEDs
conditions and blinking patterns
, 7-5
front panel (fig.), 7-5
port/link LEDs, 7-6
system status and alert, 7-5
M
Management port, 6-1
connecting, 6-16
Management ports, 3-2
Management protocols supported, 2-6
MGMT interface
location on the ARX1000
, 6-1
Modules
ACM
, 3-2, 3-3
N
Network protocols, 2-5
O
Operational status LEDs, 7-4
P
Ports
LEDs
, 7-6
management, console, 3-2, 6-1
POST diagnostics, 7-1
Power cords
attaching
, 5-5
Power supply
features
, 3-4
Powering up the switch, 5-5
Protocols supported, 2-5
R
Rack-mounting the switch, 5-3
Redundancy
between two ARX1000’s
, 2-3
Regulatory compliance, 4-1
Removing and replacing a disk drive, A-1
Resilient Overlay Network (RON), 2-4
RON tunnels, 2-4
Running the boot wizard, 6-2, 6-10
S
Safety instructions, 5-2
SATA disks, 3-4
Security protocols supported, 2-5
Serial console port, 6-2
Site and safety considerations, 5-2
Specifications, 4-3
ARX1000 chassis, 4-3
environmental, 4-3
physical, 4-3
power, 4-3
Static electricity, A-1
Status indicators (LEDs), 7-5
Status LEDs, 7-5
Switch boot-up, 6-2
Switch cable connectors, 4-5
Switch installation
safety instructions
, 5-2
tools required, 5-2
Switch LEDs (fig.), 7-5
Switch management ports, 3-2, 6-1
Switch-to-switch failover, 2-3
System specifications, 4-3