Installation guide

Operational Status and Troubleshooting
LED Status Indicators
ARX®1000 Hardware Installation Guide 7-5
• hard-drive LED and NVR-battery-backup LEDs (also shown in Figure 7-3)
• Ethernet management port and user port LEDs (see Figure 7-4 on page 7-5)
Figure 7-3. ARX®1000 System LEDs
Figure 7-4. ARX®1000 Port LEDs
Status LEDs
The ARX®1000 front panel provides the following LED status indicators:
ALERT — Illuminates Red to indicate an operational failure
system Alert
(red if hardware
fails)
module Status
(green = ’all OK’,
yellow = ’at least
one failed’)
Hard Disk
activity (not
supported)
yellow when NVR
powered by backup
battery
each port has one Activity LED (yellow) and one Link LED (green)