Installation guide

Connecting the Switch to the Network
Booting the Switch
ARX®1000 Hardware Installation Guide 6-9
bstnA6k# show ron
Switch Name HA Peer Switch Uptime
Status UUID Management Addr
------------------------------------------------------------------------------
bstnA6k (None) 0 days, 02:02:47
ONLINE d9bdece8-9866-11d8-91e3-f48e42637d58 10.1.1.7
provA5c (None) 0 days, 02:01:04
ONLINE db922942-876f-11d8-9110-8dtu78fc8329 10.1.38.19
prtlndA1k prtlndA1kB 0 days, 00:30:53
OFFLINE 876616f6-79ac-11d8-946f-958fcb4e6e35 10.1.23.11
bstnA6k# ...
Applying the UUID
The initial-boot script has a prompt for the UUID (shown in the example above). This
is where you enter the UUID of the replaced switch. For example,
...
The UUID should only be entered if this chassis is replacing a failed chassis
and the entered UUID should match the UUID of the failed chassis.
11. Enter the chassis's UUID
in the format
xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx.(default=6df0854c-6af4-11d8-954a-f844c83bc5
f3) # 876616f6-79ac-11d8-946f-958fcb4e6e35
...
!
CAUTION
No two running chassis should ever share the same UUID. Only enter the UUID in a
switch-replacement scenario.