Installation guide

Connecting the Switch to the Network
Booting the Switch
6-4 ARX®1000 Hardware Installation Guide
Massachusetts, U.S.A..
2. Enter 'yes' to accept these terms and conditions
in the format 'yes' or 'no'. # yes
The switch's management port requires an IP address and mask.
3. Enter the management port IP address
in the format nnn.nnn.nnn.nnn or 'none'. # 10.1.23.11
4. Enter the management port subnet mask
in the format nnn.nnn.nnn.nnn.(default=255.0.0.0) # 255.255.255.0
The switch's management port requires a gateway IP address.
5. Enter the gateway IP address for the management interface
in the format nnn.nnn.nnn.nnn or 'none'.(default=10.1.23.1) # 10.1.23.1
A switch replacement requires additional configuration questions.
6. Are you doing a switch replacement?
in the format 'yes' or 'no'.(default=no) # no
The crypto-officer is the most privileged user in the system.
7. Enter the crypto-officer username
in the format text (1-28 characters). # admin
8. Enter the crypto-officer password
in the format text (6-28 characters). # mypassword
Confirm the crypto-officer password # mypassword
A system password is required for access to the master key.
9. Enter a system password
in the format text (12-28 characters). # d0uble$ecRET
Confirm the system password # d0uble$ecRET
The master key is used to encrypt critical security parameters.
10. Enter the master key