Installation guide

Unpacking and Installing the Switch
Rack-Mounting the Switch
ARX®1000 Hardware Installation Guide 5-5
Rack-Mounting the Switch
1. Holding the switch firmly, align the switch (front panel view) with the rack rails.
2. Carefully slide the switch into place on the rails.
Figure 5-2. Aligning Switch with Rack Rails
3. Secure the switch to the rails by putting a screw through each ear on the front of
the ARX. This guards against the switch sliding out in the event of an extreme
earthquake.
Attaching the Power Cord
Locate the power ON/OFF toggle switch on the back of the switch and ensure it is set
to the OFF position.
screw
hole
Firmly grip the switch edges and slide the switch into place
on the rails.
DANGER
!
In the event that AC power must be removed from the system, disconnect the power
cord before servicing the unit to avoid electric shock.