Installation guide

System Specifications and Requirements
Cable Connectors and Pinouts
ARX®1000 Hardware Installation Guide 4-7
SFP Optical Connector
The Gigabit Ethernet optical ports use small form-factor pluggable (SFP) optical
transceivers that accept LC-style multi-mode fiber connectors. These are for
connection to Ethernet over fiber-optic cable.
Table 4-4. ACM Console Port Signaling/Cabling Using a Cross-over Cable
SCM/ACM
Console Port
Cross-over Cable Terminal Adapter Console
Device
DTE Signal RJ-45
Pinout
USOC
Color
RJ-45
Pinout
RJ-45
Pinout
T568
Color
DB9F
Pinout
DTE
Signal
TxD 3 yellow 6 6 yellow 2 RxD
GND 4green55green5Signal
Ground
GND 5red44red
RxD 6 black 3 3 black 3 TxD
!
WARNING
Fiber-optic ports are shipped with SFP optics installed. These ports must be protected
by a rubber grommet filler or a cable connector at all times to prevent dust from
collecting in the transceiver.