Installation guide

System Specifications and Requirements
Power Cord and Cable Requirements
4-4 ARX®1000 Hardware Installation Guide
Power Cord and Cable Requirements
Table 4-2 lists the required cables and power cords for the switch. All cables except
the AC power cord and console cable are customer-supplied.
Table 4-2. Required Power and Data Cables
Qty. Cable/Cord Used on... Specification
1 AC power cord AC/DC Power Supply You can choose from the two cables
shipped with the switch:
• 20 A/250 Vac or
• 15 A/120 Vac.
Both have IEC-320 type connectors.
1 Ethernet cables for
connection to 10/100
Mbps Ethernet
management port
(RJ-45 connector);
Console cable with
RJ-45-to-DB9 adapter
MGMT interface
Console interface
100BASE-T Category 5 unshielded
twisted pair (UTP); 24 AWG
4 Ethernet cables for
connection to 100/1000
Mbps Ethernet
(RJ-45 connectors)
4 copper Gigabit Ethernet
ports
a
100/1000BASE-T Category 5/6,
unshielded twisted pair (UTP) cable;
24 AWG.
2 Fiber-optic cables for
connection to 1-Gbps
Ethernet
small form-factor
pluggable (SFP) optical
connectors
2 optical Gigabit Ethernet
ports
1000BASE-SX (Gigabit Ethernet)
fiber cable:
Short-reach multi-mode fiber (MMF)
with duplex LC-style connectors.
Distances up to 500m on 50/125um
MMF, or 300m on 62.5/125um
MMF.