User's Manual
f)
RF power gain: 14dB +/-1dB (typically 27W for 700W output power);
g)
Mains power supply voltage: 93-265VAC.
h)
Mains power consumption at full output power: 1350VA or less wth a power factor of 0.95 or
higher;
i)
Mains power consumption in Low Energy (waiting) mode: less than 1VA;
j)
Complies
with
EU
safety
regulations
and
electromagnetic
compatibility
standards,
as
well
as
with the US Federal Communications Commission (FCC) rules;
k)
Environmental conditions:
- temperature range: -10ºC to +40ºC (14ºF to 104ºF);
- relative air humidity: up to 95% @ 35ºC (95ºF);
l)
Dimensions (projections not included) and weight, operating: (W x H x D) 372 x 171 x 427 mm
(14.6 x 6.7 x 16.8 In); 10.5 kg (23.15 Lbs).
8-2.
Functions
a)
Receive / transmit control:
-
KEY-IN input – Phono RCA jack;
voltage applied to the transceiver keying output up to +12V;
current drawn by the transceiver keying output up to 6mA;
-
An optional KEY-OUT output – Phono RCA jack; output resistance: not more than 120 Ohm;
maximum safe input voltage from the transceiver +50V; maximum safe current drawn by the
transceiver: 20mA;
-
minimum
dead time, necessary for safe amplier switchingover
from receive to transmit: 10ms
between the transmit request on the KEY IN input and the RF drive on the RF INPUT jack.
b)
Frequency control directly by CAT from the transceiver.
c)
Remote control through RS232 interface.
d)
Remote power on by DSR/DTR and CTS/RTS lines on the RS232 port.
e)
Remote power on/turn off by DC voltage impulse or continuous DC voltage on CAT/AUX port
ON_RMT input.
8-3.
Storage and shipment
a)
Environment conditions for storage and shipment:
-
temperature range: -40ºC to +70ºC (-40ºF to 158ºF);
-
relative air humidity: up to 75% @ 35ºC (95ºF);
-
above sea-level: up to 12000m, including the luggage compartment of an aircraft.
b)
Dimensions and weight at transportation (max): (W x H x D) 481 x 291 x 475 mm
(18.94 x 11.46 x 18.70 In); 15kg (33 Lbs).
29