User's Manual
5
W A R N I N G HIGH VOLTAGE!
Both the mains voltage and the high DC voltage up to 500V
inside the ACOM 1200S amplier are LETHAL! For your
safety, disconnect the power plug from the mains and WAIT
AT LEAST three minutes EACH TIME, BEFORE removing the
cover of the amplier.
W A R N I N G HIGH VOLTAGE!
NEVER ALLOW, ESPECIALLY CHILDREN, to push anything
into holes in the case - this will cause ELECTRIC SHOCK!
Never touch an antenna or antenna isolators during
transmission or tuning - this may result in an electric shock
or burn. Never expose the amplier to rain, snow or any
liquids. Avoid placing the amplier in excessively dusty
environments or in direct sunlight. DO NOT OBSTRUCT
COOLING ducts or vents.
W A R N I N G
Do not undertake repairs or changes in hardware or rmware
of your ACOM 1200S amplier. Doing so will endanger your
or others‘ health or life or damage the amplier and the
equipment connected to it. Such repairs or changes are
not covered by warranty and may void the warranty. The
manufacturer is not liable for any such repairs or changes.
Any such repairs or changes are sole responsibility of the
person or persons engaging in them.
C A U T I O N
To avoid damage (not covered by the warranty) please read the
INSTALLATION - Section 2 of this operating manual carefully.
If you have any doubts or questions regarding the installation,
operation or safety of the ACOM 1200S amplier, please consult
your dealer immediately.
2. INSTALLATION
2-1. Unpacking and Initial Inspection
C A U T I O N
Before you commence installing the ACOM 1200S amplier,
please read this manual thoroughly. Carefully inspect the
shipping carton and its contents as described below for missing
items (S. 1-3) or mechanical damages. If anything is missing or
is damaged (scratched, bent, crushed or something is rattling
inside or moving freely when turning the amplier over, notify
your dealer immediately! Delaying this notication may infringe
the warranty conditions of the carrier.