User's Manual

42
Chapter 4
OLD EAGLE
Chapitre à supprimer => pas de confusion dans les
produits ATEX. Mettre cet article dans un autre document
(note d'application par exemple)
1.1. PROTECTIONS
1.1.1. Lightning protection
Protection of RF connections
It is recommended to protect the connections to prevent a long-term oxidation,
oxidation for which RF connections are more sensitive than others. Adhesive tape
used is self-amalgamating types (Scotch® Super 33+ 3M™).
1.2. NETWORK CONNECTION
The gateway is powered and connected to the network with a unique ethernet cable through
a PoE injector (power over ethernet).
PoE injector characteristics:
 Input: 110-240V ~ 50-60Hz
 Output: 24V DC – 1A
 Connect the LAN port on the injector directly to a computer or Ethernet switch through an
Ethernet cable.
 Unscrew the gland from the Gateway and connect the POE port (POE OUT) on the
injector directly to the gateway through an ethernet cable.
 Power the PoE injector.
 The gateway initialize (1-2 minutes)
 The max ethernet cable length is 100 m for each cable.
RJ45
Ethernet category 5 cable
Max length = 100 meter / cable
50 sensors / gateway max.