User's Manual

For a safe installation the requirements below must be followed:
● The wall has to be designed to support the weight of the pod/bracket and all the
additional load entailed by the pod installation and external factor (wind, snow….)
● Each fixation point has to be able to support at least 25kg
● The fixation has to be adapted to the support (concrete, wood....)
● The fixation must be chosen to resist to climatic and environmental constraints
● The fixation must be tight enough to prevent any movement
● Connect the Ethernet cable on the pod and fix the Ethernet cable on the mast to avoid
any mouvement
ACOEM | ATD-300/ATD-301 | User Manual FW 1.0.0.4 46