FES2215 Fanless Embedded System User Manual FES2215: Fanless Embedded System Atom D2550 Dual Core 1.86GHz Processor 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
Copyright This publi cati on c ontains inform ation that is prot ected by copyright. N o part of it m ay be reproduced i n any form or by any m eans or used to make any transform ation/adaptation without the prior written permission from the copyr ight holde rs. The manufacturer reserves the right to revise this publication and m ake changes to its contents at any time, w ithout obl igation to noti fy any person or entity of such revisions or changes. ©201 3. Al l Rights Reserved.
FES2215 Fanless Embedded System Safety Measures To avoid dam age to the system : • Use the correct A C input vol tage range to reduce the risk of ele ctric shock. • Unplug the power cord before rem oving the system chassis cover for install ati on or servi cing. After instal lation or servicing, cover the system chassis bef ore plugging the power cord. Batte ry: • Dange r of expl osion if battery incorrectly replaced. • Repl ac e only w ith the same or e quival ent type re com mend by the manufacture r.
FES2215 Fanless Embedded System Table of Contents Copyright ................................................................. ................................................. Tradem arks ............................................................................................................... Static Electricity P re cautions .................................................................................... Safety Measures .............................................................................
FES2215 Fanless Embedded System Chapter 1: Introduction 1-1 Overview A cnodes’ FES 22 15 is an outstanding and r eliable Fan-less embedded sy st em w it h high per for mance and low power consump tion r emained. The new FES22 15 pro vides cust omer a choice of At om D2 550 / N2800 / N2600 Proces sor, depends on t he model being selected. FE S2215 has applied by t he r ecent launched At om™Pr ocessor D2550 Dualcor e 1.
1-2 Product Specification Processor & Chipset Sup por t Atom D2 550 D ual-core 1.86 GHz low p ower Pro cessor NM 10 South Bridge Chip set Graphic E ngine Graphic core 640 Mhz Sup por t AVC/ H.264, VC1/ WMV9, MPEG2 HW engine Blu -Ray Su ppor t HD CP 1.3ans PAVP 1. 1C c ontent protection sup port Sup por t M icro soft DXVA 2.0 an d Overlay DD MS C OPP and PVP-OP M sup por t Enabling Key ISVs-Corel, CyberLink, ArcSoft Sup por ts Op enGL 3.
Front Panel Extend I/O Ports Power & HDD Led.
1-3 System Block Diagram FE S 2215
1-4 Mechanical Diagrams FES 2215
1-5 Front & Rear panel Front Panel Rear Panel
2-1 Front panel Pin Definition 1. Power On/ Off Button 2. Power Reset Button 3.
2. COM 1 (DB-9): RS-23 2/ 422/ 4 85 [refe r to P.17-18, N o. 8 jumper setting] PIN RS-232 R S-422 R S-486 1 D CD# TX+ RT X+ 2 RXD RX+ Not U sed 3 T XD TX- RTX- 4 DT R# RX- Not U sed 5 GND GND G ND 6 DSR# Not Used Not U sed 7 R TS# Not Used Not U sed 8 C TS# Not Used Not U sed 9 RI# Not Used Not U sed 4 & 5. LAN 1 & 2 (R J-45) PIN D efi nition PIN Definition 1 La n_TX1+ 2 Lan_TX1- 3 La n_TX2+ 4 Lan_T X3+ 5 7 Lan_TX3La n_TX4+ 6 8 Lan_TX2Lan_TX4- 6.
2-3 Internal Pin Definition & Jumper Settings 2-3.
2-3.
2-3.3 Jumper Settings 1. Clear CM ON S Jumper (CLRCMOS1 ) [refer to P.13, N o. 1 6] It allows you to clear t he data in CM OS. To clear and reset the system parame ters to default se tup, please turn of f the computer and unpl ug the pow er cord f rom the pow er supply. Af te r wai ting for 15 seconds, use a jumpe r cap to short pin 2 and pin 3 on CLRCM OS1 for 5 seconds. However, please do not clear the CMO S right af ter you update the BIO S.
7. Panel Resolution Se lection (1 2-pin JLVD_ GPIO1) [refer to P.1 3, N o. 2 9] 8. SET COM Por ts (10 -pin SET_ CM 1,2 ) [refer to P.1 3, No. 1 ] (10 -pin SET_ CM 4,5 ,6) [refer to P.13 , N o. 20 ] (5 -pin SET_ CM 3) [refer to P.13, N o.
(COM 1 Pin1 & Pin 9 Function Setting) Item Pin 1 Fun ction Connector SET_COM1 Jumper S etti ng Config. 1 Provide ＋12V Power Source Pi n 1 & Pi n 3 short, Pin 5 & 7 & 9 NC Config. 2 Provide ＋5V Po wer Source Pi n 3 & Pi n 5 short, Pin 1 & 3 & 9 NC Config. 3 Provi de DCD# Function Pi n 7 & Pi n 9 short, Pin 1 & 3 & 5 NC Item Pin 9 Fun ction Connector SET_COM1 Jumper S etti ng Config. 1 Provide ＋12V Power Source Pin 2 & Pin 4 s hort, Pin 6 & 8 & 10 NC Config.
10. USB 2.0 Ports (4-pin USB 4,5) [refer to P.13, N o. 11 ] (4-pin USB6 ) [refer to P.13, N o. 12] 11. System Panel Header (9-pin PANEL 1) [refer to P. 13, N o. 15] Connect the powe r switch, rese t switch and system status indicator on the chassis to this header according to the pin assignments below. N ote the positive and ne gative pins before conne cting the cables.
13. Front Panel Audio Header (9-pin HD_ AUDIO1) [refer to P.13, No. 25 ] 14. DC 12V Power Connector (4-pin DC 12V 1) [re fer t o P.1 3, No. 3 ] 15. COM Port 4 ,5 ,6 (10-pin COM 4,5,6) [refer to P. 13 , No.
16. Print Port Header (25-pin LPT1) [re fer to P.13, N o. 9] 17. LVD S Con (40 -pin LV DS1) [re fer to P.13, N o. 2] 18. Output Power (4-pin SATA_ PWR1 ) [refer to P.13, No.
19. Digital I/O He ader (10 -pin JG PIO1) [re fer to P.13 , No. 13 ] 20. Panel Brightness and Speaker Volume Control (7-pin BLT_VOL1) [refer to P.1 3, No. 2 1] 21. Panel BackLight Inve rte r Connector (6-pin BLT_PWR2) [re fer to P.1 3, No. 2 2] 22. RJ-45 COM Port C (8-pin COM Port C ) [refer to P.13, N o.
Chapter 3: UEFI Setup Utility 3-1 Introduction This se ction explains how to use the U EFI SETUP U TILITY to configure yours syste m. The UEFI chip on the m otherboard stores the U EFI SETUP U TILITY. You may run the UEFI SETUP U TILITY w hen you start up the computer. P lease press or during the Power-On-Self-Test (P OST) to enter the U EFI SETUP U TILITY, otherwi se , P OST wi ll continue wi th its test routines.
3-2 Main Screen Whe n you enter the UEFI SETUP UTILITY, the Main screen wil l appear and display the syste m ove rview.
3-3 Advanced Screen In this se ction, you m ay set the confi gurati ons f or the foll owing i tem s: CPU Configuration, Chipset Configuration, Storage Conf igurati on, Super IO Configuration, A CPI Configuration, U SB Conf iguration and Voltage Conf iguration. Se tting wrong values in this se ctio may cuase the system to malfunction. Instant Flash Instant Flash is a UEFI f lash utili ty em bedded in Flash ROM.
3-3.1 CPU Configuration Intel Hyper T hre ading Technology To enabl e this feature, it requi res a c ompute r system with an Intel processor that supports HyperThreading technol ogy and an operating syste m that includes optimization for this te chnol ogy, such as Mi crosoft® Wi ndow s® 7. Se t to [Enabled] if using Mi crosoft® Wi ndow s® 7. N o-Execute M emory Protec tion No-Execution (N X) M emory P rote ction Technology is an e nhance ment to the IA-32 Intel A rchitecture .
3-3.2 Chipset Configuration Set Pane l Type by Use this to c onf igure Set P anel Type.The Default value is [UEFI Setup]. Panel Type Sele ction Use this to sele ct panel type . The default va lue i s [1366 x768/ 18-bi t/ 1 -ch/LED ]. ACPI H PET Table Use this item to enable or disable ACPI HPET Table. The defaul t value i s [Enabl ed]. Pl ease se t this option to [Enable d] if you plan to use this motherboard to subm it W indows® certi fication.
3-3.3 Storage C onfiguration Onboard SATAII M ode Use this to sele ct SATA 2 m ode. The default value is [IDE Mode ]. Confi gurati on options: [IDE Mode], [AHCI Mode] and [D isabled]. ACHI (Advanced Host Controller Interfac e) suppor ts NCQ a nd other new features that will improve SATA disk perfor mance but IDE mode does not have these advantage. Hard Disk S.M .A.R.T Use this item to enable or disable the S.M.A.R.T ( Sel f-Monitor ing, Analysis, and Reporting Technology) feature.
3-3.4 S uper IO Configuration COM 1 Configuration Use this to set parameters of CO M1 . COM 2 Configuration Use this to set parameters of CO M2 . COM 3 Configuration Use this to set parameters of CO M3 . COM 4 Configuration Use this to set parameters of CO M4 . COM 5 Configuration Use this to set parameters of CO M5 . COM 6 Configuration Use this to set parameters of CO M6 . LPT1 Configuration Use this to set parameters of the onboard paral lel port.
3-3.5 ACP I Configuration Suspe nd to RAM Use this item to sel ect whether to auto-detect or disable the Suspend-to-RAM feature. Select [Aut o] wi ll e nable this fe ature if the O S supports i t. S3 V ideo Repost Use this to enable/disable S3 V ideo Repost. The de fault value is [Enabl ed]. PS/2 Keyboa rd Powe r On Use this item to enable or disabl e PS/2 ke yboard to turn on the system from the power -soft-off m ode .
3-3.6 US B Configuration USB 2.0 Controller Use this item to enable or disabl e the use of USB 2 .0 control ler. Legacy U SB Suppor t Use this option to sele ct legacy support for USB devices. There are four c onfiguration opt ions: [Enabled], [Auto], [Disabled] a nd [U EFI Setup Only]. The defaul t value is [Enabled]. Pl ease re fer to below descriptions for the detai ls of these four options: [Enabled]: Enabl es support for legacy USB. [Auto]: Enables legacy support i f U SB devi ces are connected.
3-3.7 Voltage Configuration DRM A Voltage Use this item to sel ect DRM A Voltage . The def ault value is [A uto].
3-4 Hardware Health Event Monitoring Screen In this section, it al low s you to moni tor the status of the ha rdware on your system , i ncl uding the param ete rs of the CP U tem perature, mothe rboard tem pe rature, CPU fan speed, chassi s fan spe ed, and the critical voltage. CPU _FAN 1 Setting Thi s al lows you to se t CP U-FA N 1 ’s spe ed. The de fault value is [Full On]. Confi guration options: [Full On] and [Autom atic Mode]. CHA_FAN 1 Se tting Thi s al lows you to se t CHA -FAN 1’s speed.
3-5 Boot Screen In this section, it wi ll display the avai lable devices on your system for you to conf igure the boot setti ngs and the boot priority. Setup Prom pt T imeout Thi s shows the num ber of seconds to wait for setup activation key. 6553 5 ( 0XFFFF) m eans i ndefinite wa iting. Bootup N um -Lock If this ite m is se t to [On], it wi ll autom atically activate the Nume ric Lock function af te r boot-up.
3-6 Security Screen In this section, you may se t, change or cl ear the supervisor/ user password for the system.
3-7 Exit Screen Save Changes and Exit When you sele ct thi s optino, it wil l pop-out the fol lowi ng m essage, “Save configuration changes and exit setup?” Select [OK] to save the changes and exit the UEFI SETUP U TILITY. Discard Changes and Exit When you sele ct thi s option, it wi ll pop-out the following message, “Di scard changes and exi t se tup? ” Sel ect [O K] to ex it the UEFI SETUP U TILITY w ithout saving any changes.
Chapter 4: Installation Guide 4-1. Memory Modules (SO-DIMM) Pipal 2215 provide s two 240-pin DDR3 SO -DIMM slots. - It is NO T al low ed to install a DDR or DDR2 m emory module into a DDR 3 slot; otherw ise, the m otherboard and SO-DIMM m ay be damaged. - Ple ase install the m em ory modul e from DDR3_A 2 slot as the 1st pri ority. 4-1.1 Installing a SO-DIM M Ple ase make sure to disconne ct the power supply before adding or rem oving SO -DIMMs or the system components.
4-2. Expansion Slot (PCI Slot) There i s 1 Mi ni-PCI-E ex pansi on slot for FES 22 15. PCI Slot: The P CI sl ot is use d to instal l an expansion car d that has 32 -bit P CI interf ace. 4-2.1 Installing an expansion card STEP 1: Before instal ling the e xpansi on card, ple ase make sure that the power supply is switche d off or the powe r cord i s unpl ugged. P lease read the documentation of the e xpansi on card and m ake nece ssary hardware se tti ng for the card before you start the i nstallation.
