RP1170/1195 1U 17/19” Rackmount LCD Monitor User Manual RP1170/1195: 1U 17/19” Industrial Rackmount LCD Monitor 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
RP1170/1195 1U 17/19” Rackmount LCD Monitor Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment. Safety Instructions Please read all of these instructions carefully before you use the device.
RP1170/1195 1U 17/19” Rackmount LCD Monitor Contents < Part. 1 > RP1170 / RP1195 1.1 1.2 1.3 Package Content Structure Diagram & Dimension Installation P.1 P.1 - 2 P.3 < Part. 2 > Specifications / OSD 2.1 2.2 Product Specifications On-screen Display Operation ( OSD ) P.4 - 5 P.6 - 7 < Part. 3 > Options 3.1 3.2 3.3 HDMI, S-Video + BNC & Audio 17” / 19” Touchscreen : Resistive, Capacitive 48V, 24V or 12VDC power 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 P.8 P.9 P.
RP1170/1195 1U 17/19” Rackmount LCD Monitor Before Installation ¦ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ¦ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition.
RP1170/1195 1U 17/19” Rackmount LCD Monitor < Part 1 > < 1.1 > Package Content RP 1170 or RP1195 unit X 1 - 6ft VG A c ab le X 1 - Pow er c ord X 1 - M 6 screw, c age nut & cup washer X 8 Th e ab ove packag e co ntent is only for the pu re m o del ( VG A and DVI-D on ly ). It varies w ith op tion s such as HDMI, AV, au dio , to uchscreen & DC p ow er. < 1.
RP1170/1195 1U 17/19” Rackmount LCD Monitor < 1.2 > Dimension Front View UNIT : mm Side View 1mm = 0.03937 inch Top View Mod el Pro duct Dim ension (W x D x H) Packing Dim ension (W x D x H) Net Weight Gross Weig ht RP1170 series 441.6 x 500 x 44 mm 17.4 x 18.1 x 1.73" 590 x 687 x 120 mm 23.2 x 27 x 4.7” 10.5 k g 23 lb 16.5 k g 36 lb RP1195 series 441.6 x 500 x 44 mm 17.4 x 19.7 x 1.73" 590 x 687 x 120 mm 23.2 x 27 x 4.7” 12.5 k g 28 lb 18.
< 1.3 > Installation - How to install Installation Slides Step ¦ Insert the left and right rear mounting brackets into the display drawer. Step ¦ ¦ 1 2 Measure the depth of the front and rear mounting rails. Align each rear mounting bracket to a suitable length. Step 3 Complete the installation ¦ Fix the display drawer into the rack. M6 screw, cage nut & cup washer x 8 are provided.
RP1170/1195 1U 17/19” Rackmount LCD Monitor < Part 2 > < 2.1 > Product Specifications LCD Panel RP1170 RP1195 17-inch TFT color LCD 19-inch TFT color LCD 1280 x 1024 1280 x 1024 250 250 Contrast Ratio ( typ. ) 1000:1 1000:1 Color 16.7 M 16.7 M 80/80/80/80 80/80/80/80 5 5 0.264 0.294 337.92H x 270.33V 376.32H x 301.05V Manufacturer Panel Size ( diagonal ) Display pixel ( dots x lines ) Brightness ( typ.
RP1170/1195 1U 17/19” Rackmount LCD Monitor Power Environmental Conditions Power Supply Range Auto-sensing 100 to 240VAC, 50 / 60Hz Power Consumption Screen display ON 25W or less Power saving mode 4W or less Power button OFF 1W or less Operating Storage Physical Specification 0 to 50°C degree Humidity 20~90%, non-condensing Temperature -5 to 60°C degree Humidity 5~90%, non-condensing Shock 10G acceleration (11ms duration) Vibration 5~500Hz 1G RMS random RP1170 RP1195 441.
RP1170/1195 1U 17/19” Rackmount LCD Monitor < 2.3 > On-screen Display Operation ( OSD ) Membrane Switch Function Turn the monitor on or off Display the OSD menu Act as an Enter key to select screen setting options Scroll through menu options and adjust the displayed control Exit the OSD screen Go back to the previous on-screen sub-menu or main menu Remark : All LED touch buttons in WHITE light. The LED of Power touch button will flash continuously when there is no signal input.
RP1170/1195 1U 17/19” Rackmount LCD Monitor < 2.3 > On-screen Display Operation ( OSD ) OSD Configuration Page Image: for the brightness, contrast, color temp, red, green, and blue Geometry: for the auto adjust, H position, V position, phase and clock Video: for the colour, tint, sharpness, noise reduction, DCDi and TV Setup Audio: for volume, bass, treble, balance, AVL and mute Misc: for the language, OSD position, graphic mode, ratio, reset and timer 14628 Central Ave, Chino, CA 91710 tel:909.
RP1170/1195 1U 17/19” Rackmount LCD Monitor < Part 3 > < 3.1 > Options : - HDMI ( HDMI 1.1, CEA-861-D ) ( S-Video + Composite, BNC ) - AV - Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers ) ( 1 ) For AV2.2 upgrade, either HDMI or DVI-D is provided. ( 2 ) For the above options, casing depth will be extended from 500mm ( 19.7" ) to 570mm ( 22.4" ) Power HDMI Audio S-Video BNC DVI-D VGA in - in - out PC Video 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.
RP1170/1195 1U 17/19” Rackmount LCD Monitor < 3.2 > Options : Touchscreen & driver 17” / 19" USB Touchscreen Specification 17’ Model 19” TRB 19” TCB e-Resistive e-Capacitive Technology 5-Wire Resistive Capacitive Touch Point Single Single Stylus or Finger Finger = 50g / Stylus=R0.8 = 50g 35 million touches 300 million touches 15 ms 20 ms 80% ± 3% 93% ±2% 3H 9H 8% ± 3% 7% Method Activation Force Durability Response Time Optical Transmittance Surface Hardness Haze Glass 1.4 ±0.
RP1170/1195 1U 17/19” Rackmount LCD Monitor Please follow the below steps to setup the touch screen:Step 1. Run the bundled CD disc Step 2. Double click the Setup.exe Step 3. Follow the installation instruction to finish the setup Step 4. After installation, run the TouchKit program & the “4 point calibration” Please do the initial calibration after the first setup 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved.
RP1170/1195 1U 17/19” Rackmount LCD Monitor < 3.3 > Options : DC Power Model 12V 24V 48V Input voltage: 12-Volt 24-Volt 48-Volt Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V - No load 50 mA 50 mA 50 mA - Full load 4950 mA 2450 mA 1220 mA Output voltage: 12-Volt 12-Volt 12-Volt Output current: 4.16A 4.16A 4.
