User Manual

< 1.3 > Installation
Step
1
¦ Mount the rear bracket with M6 screw set.
¦ 8 x M6 screw set are required.
M6 screw sets are not provided.
rear bracket
Step
2
¦ Insert the upper part of the R MW8215
display panel into the rear bracket.
Step
3
¦ Push the lower part of RMW8215
display panel into the rear bracket.
Fastener screw
Step
4
¦ Fix the RMW8215 display panel into the rear
bracket with two fasteners ( Left & right side ).
¦ Lock the RMW8215 display panel by
the latch ( on the bottom left & right
side ).
latch