RMC 5015 1U Rackmount System User Manual RMC5015: 1U Rackmount Computer comes with Atom 330 1.6GHz CPU 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
RMC 5015 1U Rackmount System The information in this User's Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com.
RMC 5015 1U Rackmount System Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the Acnodes RMC5015. Installation and maintainance should be performed by experienced technicians only. The Acnodes RMC5015 is a single processor 1U mini rackmount server based on the RMC5015 server chassis and the embedded board.
RMC 5015 1U Rackmount System Chapter 4: System Safety You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed when installing and servicing the Acnodes RMC5015. Chapter 5: Advanced Motherboard Setup Chapter 5 provides detailed information on the embedded board, including the locations and functions of connectors, headers and jumpers.
RMC 5015 1U Rackmount System Table of Contents CHAPTER 1 INTRODUCTION 1-1 Overview .......................................................................................................... 1 1-2 Motherboard Features..................................................................................... 2 Processor ........................................................................................................ 2 Memory ................................................................................
RMC 5015 1U Rackmount System CHAPTER 3 System Interface 3-1 Overview .......................................................................................................... 14 3-2 Control Panel Buttons ..................................................................................... 14 Reset Button .................................................................................................... 14 Power ...........................................................................................
RMC 5015 1U Rackmount System 5-5 Onboard Processor ......................................................................................... 25 5-6 Installing Memory .................................................................................................. 25 DIMM Installation .............................................................................................. 25 Memory Support...............................................................................................
RMC 5015 1U Rackmount System LAN1/2 Enable/Disable .................................................................................34 5-11 Onboard Indicators.......................................................................................... 35 LAN1/2 LEDs................................................................................................... 35 5-12 IDE and SATA Ports ....................................................................................... 36 IDE Connector .................
RMC 5015 1U Rackmount System Appendix A POST Error Beep Codes Appendix B Installing Windows Appendix C System Specifications 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
RMC 5015 1U Rackmount System CHAPTER 1 INTRODUCTION 1.1 Overview The Acnodes RMC5015 is a single processor, 1U rackmount server. The RMC5015 is comprised of two main subsystems: the RMC5015 chassis and the embedded board. Please refer to our web site for information on operating systems that have been certified for use with the RMC5015. In addition to the mainboard and chassis, various hardware components may have been included with the RMC5015, as listed below. o One CPU heatsink o One single 2.
RMC 5015 1U Rackmount System 1-2 Motherboard Features At the heart of the Acnodes RMC5015 lies the embedded board, a single processor, low-power motherboard based upon Intel's 945GC chipset. Below are the main features of the embedded board. Processor The X7SLA-H supports one Intel® Atom™ 330 Dual-core 1.6 GHz processor while the X7SLA-L supports one Intel® Atom™ 230 Single-core 1.6 GHz processor. The processors are embedded into the motherboard.
RMC 5015 1U Rackmount System Figure 1-1. Intel 945GC Chipset: System Block Diagram 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
RMC 5015 1U Rackmount System 1-3 Server Chassis Features The following is a general outline of the main features of the RMC5015 1U mini rackmount server chassis. System Power The RMC5015 chassis includes a single 200W power supply. SATA Subsystem The RMC5015 chassis was designed to support one 3.5" or two 2.5" internal SATA drives (not hotswappable). ATA/100 IDE drives can be alternately sup- ported.
RMC 5015 1U Rackmount System CHAPTER 2 INSTALLATION 2-1 Overview This chapter provides a quick setup checklist to get your Acnodes RMC5015 and running. Following the steps in the order given should enable you to have the system operational within a minimal amount of time. This quick setup assumes that your RMC5015 system has come to you with the pro- cessor and memory preinstalled. If your system is not already fully integrated with a motherboard, processor, system memory etc.
RMC 5015 1U Rackmount System Rack Precautions o Ensure that the leveling jacks on the bottom of the rack are fully extended to the floor with the full weight of the rack resting on them. o In a single rack installation, stabilizers should be attached to the rack. o In multiple rack installations, the racks should be coupled together. o Always make sure the rack is stable before extending a component from the rack.
RMC 5015 1U Rackmount System Rack Mounting Considerations Ambient Operating Temperature If installed in a closed or multi-unit rack assembly, the ambient operating tempera- ture of the rack environment may be greater than the ambient temperature of the room. Therefore, consideration should be given to installing the equipment in an environment compatible with the manufacturer's maximum rated ambient tempera- ture (Tmra).
RMC 5015 1U Rackmount System 2-4 RackMounting Instructions This section provides information on installing the RMC5015 chassis into a rack unit There are a variety of rack units on the market, which may mean the assembly procedure will differ slightly. You should also refer to the installation instructions that came with the rack unit you are using. Installing the Chassis into a Rack 1. Confirm that chassis includes the four mounting screws required to mount the chassis into a rack 2.
RMC 5015 1U Rackmount System Installaing into a Telco Rack The RMC5015 supports Telco Rack installation. The RMC5015 chassis compact design allows the chassis to be installed into a Telco rack without the use of rails. Installing the Chassis into a Telco Rack 1. Confirm that chassis includes the four mounting screws required to mount the chassis into a rack 2. Align the thru holes of the chassis with the thru holes of the rack. 3.
RMC 5015 1U Rackmount System 2-5 Checking the Motherboard Setup After you install the RMC5015 in the rack, you will need to open the unit to make sure the motherboard is properly installed and all the connections have been made. Accessing the Inside of the System (Figure 2-5) 1. First, grasp the two handles on either side and pull the unit straight out until it locks (you will hear a "click"). 2. Remove the five screws that hold the chassis cover in place.
RMC 5015 1U Rackmount System 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
RMC 5015 1U Rackmount System 2-6 Checking the Drive Bay Setup Next, you should check to make sure the drives have been properly installed and all essential connections have been made. Checking the Drives 1. Refer to Chapter 6 if you need to reinstall a DVD-ROM drive to the system. 2. Depending upon your system's configuration, your system may have one or two Serial ATA drives already installed. If you need to install Serial ATA drives ,please refer to the appropriate section in Chapter 6.
RMC 5015 1U Rackmount System CHAPTER 3 SYSTEM INTERFACE 3-1 Overview There are several LEDs on the control panel to keep you constantly informed of the overall status of the system as well as the activity and health of specific components. There are also two buttons on the control panel. This chapter explains the meanings of all LED indicators and the appropriate response you may need to take.
RMC 5015 1U Rackmount System Overheat When this LED is on it indicates an overheat condition, which may be caused by cables obstructing the airflow in the system or the ambient room temperature being too warm. Check the routing of the cables and make sure all fans are present and operating normally. You should also check to make sure that the chassis covers are installed. Finally, verify that the heatsinks are installed properly (see Chapter 5).
RMC 5015 1U Rackmount System Power Indicates power is being supplied to the system's power supply units. This LED should normally be illuminated when the system is operating. 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
RMC 5015 1U Rackmount System CHAPTER 4 SYSTEM SAFETY 2-1 Electrical Safety Precautions Basic electrical safety precautions should be followed to protect yourself from harm and the Acnodes RMC5015 from damage: o Be aware of the locations of the power on/off switch on the chassis as well as the room's emergency power-off switch, disconnection switch or electrical outlet. If an electrical accident occurs, you can then quickly remove power from the system.
RMC 5015 1U Rackmount System o Motherboard Battery: CAUTION - There is a danger of explosion if the onboard battery is installed upside down, which will reverse its polarites (see Figure 4-1). This battery must be replaced only with the same or an equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. o DVD-ROM Laser: CAUTION - this server may have come equipped with a DVD-ROM drive.
RMC 5015 1U Rackmount System o After accessing the inside of the system, close the system back up and secure it to the rack unit with the retention screws after ensuring that all connections have been made. 4-3 ESD Precautions Electrostatic Discharge (ESD) is generated by two objects with different electrical charges coming into contact with each other. An electrical discharge is created to neutralize this difference, which can damage electronic components and printed circuit boards.
RMC 5015 1U Rackmount System 4-4 Operating Precautions Care must be taken to assure that the chassis cover is in place when the RMC5015 is operating to assure proper cooling. Out of warranty damage to the system can occur if this practice is not strictly followed. 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice.
RMC 5015 1U Rackmount System CHAPTER 5 ADVANCED MOTHERBOARD SETUP This chapter covers the steps required to install the embedded board into the chassis, connect the data and power cables and install add-on cards. All motherboard jumpers and connections are also described. A layout and quick refer- ence chart are included in this chapter for your reference. Remember to completely close the chassis when you have finished working with the motherboard to better cool and protect the system.
RMC 5015 1U Rackmount System Unpacking The motherboard is shipped in antistatic packaging to avoid electrical static discharge. When unpacking the board, make sure the person handling it is static protected. 5-2 Motherboard Installation This section explains the first step of physically mounting the embedded board into the RMC5015 chassis. Following the steps in the order given will eliminate the most common problems encountered in such an installation.
RMC 5015 1U Rackmount System 5-3 Connecting Cables Now that the motherboard is installed, the next step is to connect the cables to the board. These include the data cables for the peripherals and control panel and the power cables. Connecting Data Cables The cables used to transfer data from the peripheral devices have been carefully routed to prevent them from blocking the flow of cooling air that moves through the system from front to back.
RMC 5015 1U Rackmount System 5-4 I/O Ports The I/O ports are color coded in conformance with the PC 99 specification. See Figure 5-2 below for the colors and locations of the various I/O ports. 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
RMC 5015 1U Rackmount System 5-5 Onboard Processor The Intel Atom processor is soldered directly onto the motherboard. Installing and removing the processor is not required. A small active heatsink (with fan) sits on the processor to keep it cool. 5-6 Installing Memory Note: Check the Supermicro web site for recommended memory modules. CAUTION Exercise extreme care when installing or removing DIMM modules to prevent any possible damage. DIMM Installation 1.
RMC 5015 1U Rackmount System 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
RMC 5015 1U Rackmount System 5-7 Adding PCI Expansion Cards The RMC5015 chassis can accommodate one full-height, half-length PCI expansion card. Installing an Expansion Card 1. After powering down the system, remove the PCI slot shield. 2. Fully seat the card into the slot, pushing down with your thumbs evenly on both sides of the card. 3. Finish by using a screw to secure the top of the card shield to the chassis.
RMC 5015 1U Rackmount System 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
RMC 5015 1U Rackmount System 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
RMC 5015 1U Rackmount System 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
RMC 5015 1U Rackmount System 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
RMC 5015 1U Rackmount System 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
RMC 5015 1U Rackmount System 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
RMC 5015 1U Rackmount System 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
RMC 5015 1U Rackmount System 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
RMC 5015 1U Rackmount System 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2005 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
RMC 5015 1U Rackmount System 5-13 Installing Software After the hardware has been installed, you should first install the operating system and then the drivers. The necessary drivers are all included on the CDs that came packaged with your motherboard. 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice.
RMC 5015 1U Rackmount System Doctor III The Doctor III program is a Web based management tool that supports remote management capability. It includes Remote and Local Management tools. The local management is called SD III Client. The Doctor III program in- cluded on the CD-ROM that came with your motherboard allows you to monitor the environment and operations of your system. Doctor III displays crucial system information such as CPU temperature, system voltages and fan status.
RMC 5015 1U Rackmount System 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
RMC 5015 1U Rackmount System CHAPTER 6 ADVANCED CHASSIS SETUP This chapter covers the steps required to install components and perform main- tenance on the SC502L chassis. For component installation, follow the steps in the order given to eliminate the most common problems encountered. If a step is unnecessary, skip ahead to the step that follows. Tools Required The only tool you will need to install components and perform maintenance is a Philips screwdriver.
RMC 5015 1U Rackmount System 6-2 Control Panel The control panel (located on the front of the chassis) must be connected to the JF1 connector on the serverboard to provide you with system control buttons and status indicators. These wires have been bundled together in a ribbon cable to simplify the connection. Connect the cable from JF1 on the serverboard to the Control Panel PCB (printed circuit board). Make sure the red wire plugs into pin 1 on both connectors.
RMC 5015 1U Rackmount System 6-3 System Fans The RMC5015 is a fan-less chassis, which results in extremely quiet and energy- efficient operation. The only fan in the system is located on the heatsink for the embedded processor. 6-4 Drive Bay Installation/Removal Installling a 3.5" SATA Drive (Figure 6-3) 1. Power down the system and unplug the AC power cord. 2. Remove the chassis cover as described on page 2-6. 3.
RMC 5015 1U Rackmount System 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
RMC 5015 1U Rackmount System 6-5 Power Supply The RMC5015 chassis has a single 200 watt power supply. This power supply is auto-switching capable. This enables it to automatically sense and operate at a 100v to 240v input voltage. In the event that the power supply unit fails, the system will shut down and you will need to change the power supply unit. New units can be ordered directly from Acnodes (see contact information in the Preface). Replacing the Power Supply (Figure 6-5) 1.
RMC 5015 1U Rackmount System 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218 © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
RMC 5015 1U Rackmount System CHAPTER 7 BIOS 7-1 Introduction This chapter describes the AMI BIOS Setup Utility for the embedded board. The AMI ROM BIOS is stored in a Flash EEPROM and can be easily updated. This chap- ter describes the basic navigation of the AMI BIOS Setup Utility setup screens. Starting BIOS Setup Utility To enter the AMI BIOS Setup Utility screens, press the key while the system is booting up. Note: In most cases, the key is used to invoke the AMI BIOS setup screen.
RMC 5015 1U Rackmount System Starting the Setup Utility Normally, the only visible POST (Power On Self Test) routine is the memory test. As the memory is being tested, press the key to enter the main menu of the AMI BIOS Setup Utility. From the main menu, you can access the other setup screens. An AMI BIOS identification string is displayed at the left bottom corner of the screen, below the copyright message.
RMC 5015 1U Rackmount System System Overview: The following BIOS information will be displayed: System Time/System Date Use this option to change the system time and date. Highlight System Time or Sys- tem Date using the arrow keys. Enter new values through the keyboard. Press the key or the arrow keys to move between fields. The date must be entered in Day MM/DD/YY format. The time is entered in HH:MM:SS format. (Note: The time is in the 24-hour format. For example, 5:30 P.M. appears as 17:30:00.
RMC 5015 1U Rackmount System 7-3 Advanced Setup Configurations Use the arrow keys to select Boot Setup and hit to access the submenu items: XBIOS Features Quick Boot If Enabled, this option will skip certain tests during POST to reduce the time needed for system boot. The options are Enabled and Disabled. Quiet Boot This option allows the bootup screen options to be modified between POST mes- sages or the OEM logo. Select Disabled to display the POST messages.
RMC 5015 1U Rackmount System tion embedded in the CPU. The High Performance Event Timer is used to replace the 8254 Programmable Interval Timer. The options are Enabled and Disabled. XACPI Configuration Use this feature to configure ACPI (Advanced Configuration and Power Interface) power management settings for your system. ACPI Aware OS Select Yes to enable ACPI support for the OS. Disable this feature if ACPI is not supported by your OS. The options are Yes and No.
RMC 5015 1U Rackmount System resume its last state before a power loss. The options are Power-On, Power-Off and Last State. Power Button Function If set to Instant Off, the system will power off immediately as soon as the user presses the power button. If set to 4 Seconds Override, the system will power off when the user presses the power button for 4 seconds or longer. The options are Instant Off and 4 Seconds Override.
RMC 5015 1U Rackmount System XAdvanced Chipset Control The items included in the Advanced Settings submenu are listed below: XNorthBridge Configuration This feature allows the user to configure the settings for the Intel 945GC North- Bridge. DRAM Frequency This feature allows the user to select the DRAM Frequency setting. The options are Auto (Auto-detect), 400 MHz and 533 MHz.
RMC 5015 1U Rackmount System XVideo Function Configuration DVMT Mode Select This option allows the user to set the DVMT mode. The options are Fixed Mode, DVMT Mode and the COMBO mode. DVMT/Fixed Memory This option allows the user to set the amount of memory to be used for operation in the DVMT/Fixed Mode. The options are 64 MB, 128 MB and Maximum DVMT. Boot Display Device This option allows the user to select the boot display device. The options are CRT on Port 0, LFP on Port2, and CRT-Port 0 & LFP-Port 2.
RMC 5015 1U Rackmount System Clock-Spread Spectrum Select Enable to use the feature of Clock Spectrum, which will allow the BIOS to monitor and attempt to reduce the level of Electromagnetic Interference caused by the components whenever needed. The options are Disabled and Enabled.
RMC 5015 1U Rackmount System activate the following submenu screen for detailed options of these items. Set the correct configurations accordingly. The items included in the submenu are: Type Select the type of device connected to the system. The options are Not Installed, Auto, CD/DVD and ARMD. LBA/Large Mode LBA (Logical Block Addressing) is a method of addressing data on a disk drive. In the LBA mode, the maximum drive capacity is 137 GB.
RMC 5015 1U Rackmount System For other disk drives, such as IDE CD-ROM drives, check the specifications of the drive. DMA Mode Select Auto to allow the BIOS to automatically detect IDE DMA mode when the IDE disk drive support cannot be determined. Select SWDMA0 to allow the BIOS to use Single Word DMA mode 0. It has a data transfer rate of 2.1 MBs. Select SWDMA1 to allow the BIOS to use Single Word DMA mode 1. It has a data transfer rate of 4.2 MBs.
RMC 5015 1U Rackmount System 32-Bit Data Transfer Select Enabled to enable 32-Bit data transfer. The options are Enabled and Disabled. Hard Disk Write Protect Select Enabled to use the feature of Hard Disk Write Protect to prevent data from being written to HDD. The options are Enabled or Disabled. IDE Detect Time Out Use this feature to set the time-out value for the BIOS to detect the ATA, ATAPI devices installed in the system. The options are 0 (sec), 5, 10, 15, 20, 25, 30, and 35.
RMC 5015 1U Rackmount System PCI IDE Bus Master Select Enabled to allow the BIOS to use the PCI bus master to read from and write to the onboard IDE drives. The options are Enabled and Disabled. PCI Slot 5, PCIE X8 Slot6, PCIE X4 Slot7 Select Yes to enable OPROM for a PCI slot as specified. The options are Yes (to enable OPROM for the slot specified) and No. Load Onboard LAN 1 Option ROM/ Load Onboard LAN 2 Option ROM Select Enabled to load the onboard LAN Option ROM for the LAN port as specified.
RMC 5015 1U Rackmount System Select Workstation if your system is used as a Workstation. Select Server if your system is used as a Server. Select "Disabled, (Full Speed @12V)" to disable the fan speed control function and allow the onboard fans to constantly run at the full speed (12V). The Options are Disabled, 4-Pin (Server), 4-Pin (Workstation) and 4-Pin (Super Quiet)].
RMC 5015 1U Rackmount System XRemote Access Configuration Remote Access This feature allows the user to enable the function of Remote Access. The options are Disabled and Enabled. If the item Remote Access is set to Enabled, the following items will display: Serial Port Number This feature allows the user decide which serial port to be used for Console Redirection. The options are COM 1, and COM 2. Serial Port Mode This feature allows the user to set the serial port mode for Console Redirection.
RMC 5015 1U Rackmount System 7-4 Security Settings The AMI BIOS provides a Supervisor and a User password. If you use both pass- words, the Supervisor password must be set first. Change Supervisor Password: Use this feature to set a supervisor password. It secures the system from unau- thorized use by restricting access to persons only with the proper supervisor-level password. Select this feature and press , and then type in the Supervisor Password.
RMC 5015 1U Rackmount System Password Check Use this feature to set when the system prompts for a password. Choosing Setup will ask the user a password when entering the BIOS Setup, while selecting Always will prompt for a password during BIOS Setup and each system boot. The options are Setup and Always. Boot Sector Virus Protection When Enabled, the AMI BIOS displays a warning when any program (or virus) is- sues a Disk Format command or attempts to write to the boot sector of the hard disk drive.
RMC 5015 1U Rackmount System XHard Disk Drives This feature allows the user to specify the boot sequence from available Hard Disk Drives. The options are 1st boot device, and Disabled. o 1st Drive - [SATA: XXXXXXXXXXX] XRemovable Drives This feature allows the user to specify the boot sequence from available Removable Drives. The settings are 1st boot device, 2nd boot device, and Disabled.
RMC 5015 1U Rackmount System Save Changes and Exit When you have completed the system configuration changes, select this option to leave the BIOS Setup Utility and reboot the computer, so the new system con- figuration parameters can take effect. Select Save Changes and Exit from the Exit menu and press . Discard Changes and Exit Select this option to quit the BIOS Setup without making any permanent changes to the system configuration, and reboot the computer.
RMC 5015 1U Rackmount System Appendix A POST Error Beep Codes This section lists POST (Power On Self Test) error beep codes for the AMI BIOS. POST error beep codes are divided into two categories: recoverable and terminal. This section lists Beep Codes for recoverable POST errors. Recoverable POST Error Beep Codes When a recoverable type of error occurs during POST, BIOS will display a POST code that describes the problem.
RMC 5015 1U Rackmount System Appendix B Installing Windows After all hardware has been installed, you must first configure Intel South Bridge RAID settings before you install the OS and other software drivers. Please note that the ICH7R Driver does not support the Windows 2000 OS. B-1 Installing Windows XP/2000/2003 1. Turn on the system and insert the Microsoft Windows XP/2000/2003 Setup CD in the CD or DVD drive. 2. Reboot the system. 3. The system will perform the POST and search for a bootable drive.
RMC 5015 1U Rackmount System B-2 Installing Windows XP/2003 for RAID Systems 1. Insert Microsoft's Windows XP/2003 Setup CD in the CD Driver, and the system will start booting up from CD. 2. Press the key when the message-" Press F6 if you need to install a third party SCSI or RAID driver" displays. 3. When the Windows XP/2003 Setup screen appears, press "S" to specify ad- ditional device(s). 4.
RMC 5015 1U Rackmount System Appendix C SYSTEM SPECIFICATIONS Processors RMC5015: embedded Intel® Atom™ 330 dual-core 1.6 GHz processor Chipset Intel 945GC/ICH7R chipset BIOS 4 Mb AMI SPI Flash ROM Memory Capacity Two 240-pin DIMM slots that can support up to 2 GB of unbuffered non-ECC DDR2-533/400 SDRAM Note: See the memory section in Chapter 5 for details. SATA Controller On-chip (ICH7R) 3 Gb/s Intel SATA controller Hard Drive Support Up to two internal 2.5" drives or one internal 3.
RMC 5015 1U Rackmount System Weight Gross Weight: 10 lbs. (4.5 kg.) System Input Requirements AC Input Voltage: 100-240 VAC (auto-range) Rated Input Current: 3A max. Rated Input Frequency: 50 to 60 Hz Power Supply Rated Output Power: 200W (Part# PWS-202-1H) Rated Output Voltages: +3.3V (8A), +5V (8A), +12V (16A), -12V (0.
