PMH 8190 19” Industrial Open Frame Monitor 1000-nit High Brightness LCD User Manual PMH8190: 19” 1000-nit High Brightness Open Frame LCD monitor 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PMH 8190 19” Industrial Open Frame Monitor 1000-nit High Brightness LCD L eg al Inf orm ation F irst English printing, O ctober 2002 Information in this doc ument has been carefully checked for accuracy; howeve r, no guarantee is given to the correctness of the contents. T he information in this docum ent is subject to change without notice. W e are not liable for any injury or loss that results from the use of this equipm ent.
PMH 8190 19” Industrial Open Frame Monitor 1000-nit High Brightness LCD Contents < Part. 1 > PMH 8190 1.1 1.2 1.3 Package Content Structure Diagram & Dimension Mounting Hardware & Installation P.1 P.2 - 3 P.4 < Part. 2 > Specifications / OSD 2.1 2.2 Product Specifications On-screen Display Operation ( OSD ) P.5 - 6 P.7 < Part. 3 > Options 3.1 3.2 3.3 3.4 3.5 3.5 3.6 3.7 3.8 3.9 Option Table 3G / HD / SD-SDI Broadcast-grade input MCS Multi-display control solution AD2.
PMH 8190 19” Industrial Open Frame Monitor 1000-nit High Brightness LCD Before Installation ¦ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ¦ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition.
PMH 8190 19” Industrial Open Frame Monitor 1000-nit High Brightness LCD < Part 1 > < 1.1 > Package Content - PMH 8190 PMH8190 19" High Brightness LCD display X 1 6ft VGA cable X 1 Power adapter X 1 Power cord X 1 Standard I/O Power DVI-D VGA AD2.2 upgrade I/O Power BNC S-Video Audio out - in - in Video PC VGA HDMI AD3.
PMH 8190 19” Industrial Open Frame Monitor 1000-nit High Brightness LCD < 1.2 > Structure Diagram-PMH 8190 1 Front view 2 HOP-19 3 6 Rear view 1 Rear case 2 LCD panel 3 Audio speaker ( for HDMI, Audio or TV option ) 4 Universal open frame mounting 5 LCD membrane 6 Extended remote sensor membrane cable 4 5 ( 66cm from AD board to sensor end ) Model PMH8190 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.
< 1.2 > Dimension - PMH8190 Front View Side View HOP-19 Rear View Bottom View UNIT : mm 1mm = 0.
PMH 8190 19” Industrial Open Frame Monitor 1000-nit High Brightness LCD < 1.3 > Installation - PMH8190 ( I ) Universal mount ( II ) VESA mount ( 100*100mm ) M4 screw Hardware and M4*4 pcs for VESA mounting are not provided 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.
PMH 8190 19” Industrial Open Frame Monitor 1000-nit High Brightness LCD < Part 2 > < 2.1 > Product Specifications Mechanical Design PMH 8190 Front Panel - Rear Casing Dark grey, RAL 7037 VESA Mounting 100 x 100mm Other Mounting Universal mount Protection LCD Panel - Panel Size ( diagonal ) 19-inch TFT color LCD Display pixel ( dots x lines ) 1280 x 1024 Brightness ( typ. ) 1000 Contrast Ratio ( typ. ) 1000:1 Color 16.
PMH 8190 19” Industrial Open Frame Monitor 1000-nit High Brightness LCD Regulatory Safety Approval FCC & CE Environmental Conditions Operating Temperature 0 to 50°C degree Humidity 20~90%, non-condensing Temperature -5 to 60°C degree Humidity 5~90%, non-condensing Shock 10G acceleration (11ms duration) Vibration 5~500Hz 1G RMS random Storage Physical Specification Product ( W x D x H ) 474 x 58 x 381 mm Packing ( W x D x H ) 18.6 x 2.3 x 15 inch 651 x 124 x 597 mm 25.6 x 4.9 x 23.
< 2.
PMH 8190 19” Industrial Open Frame Monitor 1000-nit High Brightness LCD < Part 3 > Options < 3.1 > Option Table Options APH PMH SDI *** HDMI * or DVI-D S-Video * + Composite ( BNC ) Audio Touchscreen MCS multi-display control *** DC Power MIL-type / lockable connector TV ( Analog ) * Auto / switch dimming *** About SDI and MCS ( 1 ) The user can only select either SDI or MCS inputs. ( 2 ) For SDI input, the AD board will be upgraded to version 3.
PMH 8190 19” Industrial Open Frame Monitor 1000-nit High Brightness LCD < 3.2 > Options : 3G / HD / SD-SDI input Acnodes ’ SDI input is an ideal solution for the broadcast- grade video and high resolution CCTV market. Designed for use with Full HD 1080p and ultra high resolution 1920 x 1200 LCD displays, Acnodes provides a SDI input module without using additional space or power and it com es standard with a 2- year warranty.
< 3.3 > Options : MCS MCS ( Multi-display Control ) More control is always good. Especially when it is necessary and easy. Acnodes provides MCS solution to control the OSD of various LCD display up to 64 units. The RS-232C is used for the communication between the PC and the first display via a 15 feet serial cable while the CAN bus is used for the various LCD displays cascade together via CAT 5/6 cable, and daisy chain up to 1,000 meters.
< 3.4 > AD2.2 Upgrade Options : - HDMI - S-Video + BNC - Audio Power BNC S-Video Audio out - in - in Video PC VGA HDMI AV : S-Video + Composite (BNC) HDMI : HDMI 1.1, CEA-861-D Audio : 3.5mm audio jacks for audio in & out, and 2W + 2W speakers *** AD2.2 upgrade option comes with RC-1 remote controller x 1. 5 1 2 3 6 7 4 8 9 1 POWER Switches on or off the TV 2 MUTE Turn on or off the speaker 3 AV Switch to AV mode 4 0- 9 Select channels.
PMH 8190 19” Industrial Open Frame Monitor 1000-nit High Brightness LCD < 3.5 > AD3.0 Upgrade Options : - HDMI - DVI-D - S-Video + BNC - Audio Power BNC S-Video Audio out - in in Video PC AV HDMI DVI-D Audio DVI-D VGA HDMI : S-Video + Composite (BNC) : HDMI 1.1, CEA-861-D : DVI-D TMDS single link : 3.5mm audio jacks for audio in & out, and 2W + 2W speakers *** ( 1 ) AD3.
PMH 8190 19” Industrial Open Frame Monitor 1000-nit High Brightness LCD < 3.6 > Options : Touchscreen & driver 19" USB Touchscreen Specification Model TRB e-Capacitive Technology 5-Wire Resistive Capacitive Touch Point Single Single Stylus or Finger Finger = 50g / Stylus=R0.8 = 50g 35 million touches 300 million touches 15 ms 20 ms 80% ± 3% 93% ±2% 3H 9H Haze 8% ± 3% 7% Glass 3.2 ±0.2 mm 2.
PMH 8190 19” Industrial Open Frame Monitor 1000-nit High Brightness LCD Please follow the below steps to setup the touch screen:Step 1. Run the bundled CD disc Step 2. Double click the Setup.exe Step 3. Follow the installation instruction to finish the setup Step 4. After installation, run the TouchKit program & the “4 point calibration” Please do the initial calibration after the first setup 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc.
PMH 8190 19” Industrial Open Frame Monitor 1000-nit High Brightness LCD < 3.7 > Options : DC Power Model 24V 48V 24-Volt 48-Volt 18 ~ 36V 36 ~ 75V - No load 50 mA 50 mA - Full load 4880 mA 2442 mA Output voltage: 12-Volt 12-Volt Output current: 8.3A 8.3A Efficiency 85% 86% Input rating Input voltage: Input range: Input current Output rating 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved.
PMH 8190 19” Industrial Open Frame Monitor 1000-nit High Brightness LCD < 3.8 > Options : MIL-type or Lockable Connector Input MIL - type Connector Part no. MIL Standard DC Power *** ( Male ) MS3470W8-33P MIL - DTL - 26482 VGA *** ( Male ) MS3470W14-15P MIL - DTL - 26482 *** There are several additional MIL DC and VGA connector types with varying design characteristics to meet cost considerations and to provide users with the most design flexibility possible.
PMH 8190 19” Industrial Open Frame Monitor 1000-nit High Brightness LCD < 3.9 > Options : TV ( Analog ) TV Power BNC S-Video Audio out - in - in Video PC *** VGA HDMI For TV option : ( 1 ) The AD board comes standard with HDMI, VGA, S-Video, BNC, audio inputs and RC-2 remote controller. ( 2 ) Casing dimensions will be changed. 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved.
How to Use RC-2 Remote Controller 1 8 2 INPUT 3 4 5 MUTE 1 2 3 4 5 6 7 8 9 AUTO 0 -/-- VOL 9 CH 10 FRE EZ E 11 12 MENU S ELE CT A SP E CT 13 14 6 SLEEP ENTER 15 16 7 BACK 20 SOURCE SWA P EXIT PIP POSITI ON PIP AUDIO 17 18 PIP 21 19 r 1 INPUT 2 Select the source Switches on or off the TV 3 0-9 Only use in TV mode. Select channels. For channel numbers 10 and above, enter the second digit within two seconds.
< 3.10 > Options : Auto Dimming 2 1 1 DA-01 Light sensor on OP model 2 DA-01 Light sensor on AP model ( 66cm from AD board to sens or end ) DA-01 light sensor will be installed on the display front panel when auto dimming is ON in OSD menu. Then the brightness of display is changed according to its environmental brightness. Once the auto dimming is ON, users cannot adjust brightness in OSD.
