PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure User Manual PCH 5120: 12.1” Industrial Panel PC with Atom N270 1.6GHz processor 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure Table of Contents CHAPTER 1 INTRODUCTION 1.1 OVERVIEW ..................................................................................................................... 1 1.2 FEATURES...................................................................................................................... 2 1.3 FRONT PANEL................................................................................................................. 3 1.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 3.6 MOUTING THE SYSTEM ............................................................................................... 22 3.7 BOTTOM PANEL CONNECTORS ................................................................................ 23 3.7.1 M12 CONNECTION ......................................................................................... 24 3.7.2 LAN CONNECTION CABLE ...........................................................................
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 5.3.5.2 APM CONFIGURATION ....................................................................51 5.3.6 REMOTE ACCESS CONFIGURATION ........................................................ 53 5.3.7 USB CONFIGURATION ................................................................................. 57 5.3.7.1 USB MASS STORAGE DEVICE CONFIGURATION .................... 59 5.4 PCI/PnP ....................................................................
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure A.2 MAINTENANCE AND CLEANING PRECAUTIONS ....................................................84 A.2.1 MAINTENANCE AND CLEANING PRECAUTIONS ......................................84 A.2.2 CLEANING TOOLS .........................................................................................85 B. BIOS OPTIONS C. WATCHDOG TIMER D. HAZARDOUS MATERIALS DISCLOSURE D.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure CHAPTER 1 INTRODUCTION 1.1 OVERVIEW The PCH5120 is a waterproof, IP67 compliant panel PC. The PCH5120 can be submerged to 1 m and peripheral devices can be connected by using the waterproof M12 connectors on the rear panel. The PCH5120 is designed for environments with extreme amounts of dust and water. The waterproof design is not only for wet environments but for any place where a lot of dust and water can compromise a typical panel PC.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 1.2 FEATURES Some of the standard features of the PCH5120 flat panel PC include: ƒ Fully self-contained, only power from the external power supply required ƒ Wireless LAN ƒ Gigabit Ethernet ƒ IP67 protection ƒ RoHS compliant 1.3 FRONT PANEL The PCH5120 is made with an aluminum chassis. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 1.4 REAR PANEL The rear panel consists of the connectors and mounting holes. The back cover screws are also on rear panel. On the right hand side (looking from the front) are the OSD buttons. 1.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 1.6 TECHNICAL SPECIFICATIONS 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 1.7 DIMENSIONS 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure CHAPTER 2 UNPACKING WARNING: When installing the PCH5120, make sure to: ƒ Turn the power off: Chance of electrocution. Turn off the monitor and unplug it from the power supply. ƒ Only let certified engineers change the hardware settings: Incorrect settings can cause irrepa rable damage to the product. ƒ Install the monitor with assistance: The product is very heavy and may be damaged by drops and bumps.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 2.1 UNPACK THE PANEL PC To unpack the flat panel PC, follow the steps below: WARNING! Only remove the protective plastic cover stuck to the front screen after installation. The plastic layer protects the monitor surface during installation process. Step 1: Carefully cut the tape sealing the box. Only cut deep enough to break the tape. Step 2: Open the outside box. Step 3: Carefully cut the tape sealing the box.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure CHAPTER 3 INSTALLATION 3.1 TIGHTEN THE PRESSURE RELEASE SCREW WARNING: Fasten the pressure release screw on the back panel before use. The pressure release screw is loosened before shipping, but must be tightened before use to ensure the system is completely watertight. Tighten the screw shown below to 7 kg-cm (6 lb-ft/0.68 Nm). 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 3.2 HARD DRIVE INSTALLATION This section outlines the installation of the hard drive in the PCH5120. To install the hard drive, please follow the steps below: Step 1: Remove the plastic back cover. Step 2: Unfasten the screws. Lift the cover to remove (Figure 3-2). Step 3: Slide the SATA hard drive into the slot indicated below. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure Step 4: Fasten the screws. Step 5: Make sure the outer seal is seated properly, then replace the cover. 3.3 COMPACT FLASH INSTALLATION This section covers the installation of the CompactFlash® card. Step 1: Remove the back cover as shown in the hard drive installation above. Step 2: Install the CompactFlash® card in the slot indicated below. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure Step 3: Replace the cover and fasten the screws. Step 4: Make sure the outer seal is seated properly, then replace the cover. 3.4 JUMPER SETTINGS NOTE: A jumper is a metal bridge that is used to close an electrical circuit. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 3.4.3 COM2 RS-232/422/485 SELECTION Jumper Label: JP17 and JP18 Jumper Type: 3-pin and 12-pin headers Jumper Settings: See Table 3-3 and Table 3-4 This serial port can be set to use RS-232, RS-422 or RS-485 communication methods. Set all the jumpers to the same settings. The pinouts for RS-232, RS-422 and RS-485 communication are shown below. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 3.4.4 PANEL RESOLUTION Jumper Label: JP7 Jumper Type: 8-pin header Jumper Settings: See Table 3-6 This jumper selects the resolution of the display. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 3.5 I/O CONNECTOR PINOUTS All the connectors are M12 connectors, with different number of pins depending on 3.5.1 LAN CONNECTOR Connects to a network. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 3.5.2 SERIAL PORT CONNECTOR Allows serial communication. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 3.5.3 CAN & AUDIO CONNECTOR Connects to a CAN network and audio device. 3.5.4 USB PORT CONNECTOR Connects to USB device. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 3.5.5 POWER CONNECTOR Connects to a CAN network and audio device. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 3.6 MOUNTING THE SYSTEM WARNING! The panel PC is very heavy. Two or more people should mount the panel PC. Dropping or bumping the panel PC during installation can cause serious or irreparable damage to the panel PC. The following installation options are available: ƒ Lift stand ƒ Wall arm ƒ Wall mount ƒ Ceiling mount ƒ Mobile mount The installation instructions are included with the stand, arm or mount. 3.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 3.7.1 M12 CONNECTION All the optional cables attach to the PCH5120 with M12 connectors. The optional cables have M12 connectors at the one end and the standard connectors at the other end. To attach the M12 connector, align it with the slot and tighten by turning clockwise. 3.7.2 LAN CONNECTION CABLE The RJ-45 connectors enable connection to an external network.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN cable RJ-45 connector into the onboard RJ-45 port. 3.7.3 SERIAL DEVICE CABLE The serial device connectors are for connecting serial devices. Follow the steps below to connect a serial device to the panel PC. Step 1: Locate the DB-9 connector. The location of the DB-9 connector is shown in Chapter 2. Step 2: Insert the serial connector.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure Step 4: Remove the four retention screws that secure the motherboard to the chassis (Figure 3-16). Step 5: Remove the copper pillar that secures the motherboard to the chassis (Figure 3-17). Step 6: Lift the chassis up and locate the CF slot. Insert a CF card into the slot (Figure 3-18). 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure Step 3: Secure the connector. Secure the serial device connector to the external interface by tightening the two retention screws on either side of the connector. 3.7.4 USB DEVICE CABLE To connect USB devices, please follow the instructions below. Step 1: Located the USB connectors. The locations of the USB connectors are shown in Chapter 2. Step 2: Align the connectors.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure CHAPTER 4 OSD 4.1 OSD BUTTONS ƒ Power On/Off Toggles the power on and off ƒ Brightness Up Adjusts the screen brighter ƒ Brightness Down Adjusts the screen dimmer ƒ Volume Up Adjusts the volume louder ƒ Volume Down Adjusts the volume quieter ƒ Ambient Light Sensor On/Off Toggles the ambient light sensor. When the ambient light sensor is on, the screen brightness will adjust to match ambient light conditions.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 4.2 OSD SOFTWARE The OSD options can be controlled through software. A description of the options is shown below. 1. Volume On: Sound can be heard and is adjusted using the slider to the right 2. Volume Off: The sound is muted 3. Backlight On: The screen is on and the brightness is set by using the slider to the right 4. Backlight Off: The screen is turned off 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure CHAPTER 5 AMI BIOS SETUP 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. 5.1.1 Starting Setup The AMI BIOS is activated when the computer is turned on. The setup program can be activated in one of two ways. 1. Press the DELETE key as soon as the system is turned on or 2.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 5.1.3 Getting Help When F1 is pressed a small help window describing the appropriate keys to use and the possible selections for the highlighted item appears. To exit the Help Window press ESC or the F1 key again. 5.1.4 Unable to Reboot After Configuration Changes If the system cannot be booted after changes are made, restore the CMOS defaults. The CPU card should come with a restore CMOS settings jumper. Refer to Section 3.6.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 5.2 MAIN The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. ƒ System Overview The System Overview lists a brief summary of different system components. The fields in System Overview cannot be changed.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure ƒ System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds. ƒ System Date [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year. 5.3 ADVANCED Use the Advanced menu (BIOS Menu 2) to configure the CPU and peripheral devices 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 5.3.1 CPU CONFIGURATION Use the CPU Configuration menu (BIOS Menu 3) to view detailed CPU specifications and configure the CPU.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 5.3.2 IDE CONFIGURATION Use the IDE Configuration menu (BIOS Menu 4) to change and/or set the configuration of the IDE devices installed in the system. ƒ ATA/IDE Configuration [Compatible] Use the ATA/IDE Configuration option to configure the ATA/IDE controller. Disabled Disables the on-board ATA/IDE controller. Compatible DEFAULT The SATA drive is configured on an IDE channel. Enhanced Both IDE and SATA channels are configured separately.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure PATA Only Only the IDE drives are enabled. SATA drives are disabled ƒ Configure SATA as [IDE] Use the Configure SATA as option to configure SATA devices as normal IDE devices. IDE DEFAULT Configures SATA devices as normal IDE device. RAID Used when a RAID setup is installed AHCI Enables advanced SATA drive features 5.3.2.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure ƒ Type: Indicates the type of devices a user can manually select ƒ Vendor: Lists the device manufacturer ƒ Size: List the storage capacity of the device. ƒ ƒ LBA Mode: Indicates whether the LBA (Logical Block Addressing) is a method of addressing data on a disk drive is supported or not. Block Mode: Block mode boosts IDE drive performance by increasing the amount of data trans ferred.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure ƒ LBA/Large Mode [Auto] Use the LBA/Large Mode option to disable or enable BIOS to auto detects LBA (Logical Block Addressing). LBA is a method of addressing data on a disk drive. In LBA mode, the maximum drive capacity is 137 GB. Disabled BIOS is prevented from using the LBA mode control on the specified channel. Auto BIOS auto detects the LBA mode control on the specified channel.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure SWDMA0 Single Word DMA mode 0 selected with a maximum data transfer rate of 2.1 MB/s SWDMA1 Single Word DMA mode 1 selected with a maximum data transfer rate of 4.2 MB/s SWDMA2 Single Word DMA mode 2 selected with a maximum data transfer rate of 8.3 MB/s MWDMA0 Multi Word DMA mode 0 selected with a maximum datatransfer rate of 4.2 MB/s MWDMA1 Multi Word DMA mode 1 selected with a maximum data transfer rate of 13.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure ƒ 32Bit Data Transfer [Enabled] Use the 32Bit Data Transfer BIOS option to enables or disable 32-bit data transfers. Disabled Prevents the BIOS from using 32-bit data transfers. Enabled DEFAULT Allows BIOS to use 32-bit data transfers on supported hard disk drives. 5.3.3 SUPER IO CONFIGURATION Use the Super IO Configuration menu (BIOS Menu 6) to set or change the configurations for the FDD controllers, parallel ports and serial ports.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure ƒ Serial Port1 Mode [Normal] Selects the mode for the serial port. Normal DEFAULT IrDA ASK IR Normal mode IrDA mode ASKIR mode ƒ Serial Port3 Address [3E8] Selects the serial port base address. Disabled No base address 3E8 DEFAULT I/O address 3E8 2E8 I/O address 2E8 2F0 I/O address 2F0 2E0 I/O address 2E0 ƒ Serial Port3 IRQ [11] Selects the serial port interrupt address.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure ƒ Serial Port5 Address [2F0] Selects the serial port base address. Disabled No base address 2F0 DEFAULT I/O address 2F0 ƒ Serial Port5 IRQ [10] Use the Serial Port5 IRQ option to select the interrupt address for serial port 5. 10 DEFAULT IRQ address 10 5.3.4 HARDWARE HEALTH CONFIGURATION The Hardware Health Configuration menu (BIOS Menu 7) shows the operating temperature, fan speeds and system voltages.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure Full On Mode DEFAULT Automatic mode PWM Manual mode ƒ Fan is on all the time The fan adjusts its speed using these settings: Temp. Limit of OFF Temp. Limit of Start Fan Start PWM Slope PWM 1 The fan spins at the speed set in: Fan PWM control Temp. Limit of OFF [000] WARNING: CPU failure can result if this value is set too high The fan will turn off if the temperature falls below this value.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure ƒ Slope PWM [1 PWM] A bigger value will increase the fan speed in big amounts. A smaller value will increase the speed more gradually. ƒ 0 PWM ƒ 1 PWM ƒ 2 PWM ƒ 4 PWM ƒ 8 PWM ƒ 16 PWM ƒ 32 PWM ƒ 64 PWM ƒ CPU Fan PWM Control [070] This value specifies the speed of the fan. ƒ ƒ PWM Minimum Mode: 0 PWM Maximum Mode: 127 ƒ Monitored Values The following system parameters and values are shown.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 5.3.5 POWER CONFIGURATION The Power Configuration menu (BIOS Menu 8) allows the advanced power management options to be configured. 5.3.5.1 ACPI SETTINGS Use the ACPI Settings menu (BIOS Menu 9) to select the ACPI state when the system is suspended. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure ƒ Suspend Mode [S1(POS)] Use the Suspend Mode option to specify the sleep state the system enters when it is not being used. S1 (POS) DEFAULT Power consumption is reduced, but all hardware and proces sor context is retained. S3 (STR) Power consumption is greatly reduced, all hardware and processor context is lost. System memory is maintained. 5.3.5.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure Suspend When the power button is pressed the system goes into suspend mode ƒ Resume on Keyboard/Mouse [Disabled] Use the Resume on Keyboard/Mouse BIOS option to enable activity on either the keyboard or mouse to rouse the system from a suspend or standby state. That is, the system is roused when the mouse is moved or a button on the keyboard is pressed.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 5.3.6 REMOTE ACCESS CONFIGURATION Use the Remote Access Configuration menu (BIOS Menu 11) to configure remote access parameters. The Remote Access Configuration is an AMIBIOS feature and allows a remote host running a terminal program to display and configure the BIOS settings. Remote Access [Disabled] Use the Remote Access option to enable or disable access to the remote functionalities of the system.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure ƒ Serial Port Number [COM1] Use the Serial Port Number option allows to select the serial port used for remote access. COM1DEFAULT System is remotely accessed through COM1 COM2 System is remotely accessed through COM2 NOTE: Make sure the selected COM port is enabled through the Super I/O configuration menu.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure ƒ Redirection After BIOS POST [Always] Use the Redirection After BIOS POST option to specify when console redirection should occur. Disabled The console is not redirected after POST Boot Loader Redirection is active during POST and during Boot Loader Always DEFAULT Redirection is always active (Some OSes may not work if set to Always) ƒ Terminal Type [ANSI] Use the Terminal Type BIOS option to specify the remote terminal type.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure ƒ USB Configuration The USB Configuration field shows the system USB configuration. The items listed are: ƒ Module Version: x.xxxxx.xxxxx ƒ USB Devices Enabled The USB Devices Enabled field lists the USB devices that are enabled on the system ƒ USB Function [Enabled] Use the USB Function BIOS option to enable or disable USB function support. Disabled USB function support disabled Enabled DEFAULT USB function support enabled ƒ USB 2.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure Normally if this option is not enabled, any attached USB mouse or USB keyboard does not become available until a USB compatible operating system is fully booted with all USB drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard can control the system even when there is no USB driver loaded onto the system.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 10 Sec 20 Sec DEFAULT 30 Sec 40 Sec POST waits 10 seconds for the USB mass storage device after the start unit command. POST waits 20 seconds for the USB mass storage device after the start unit command. POST waits 30 seconds for the USB mass storage device after the start unit command. POST waits 40 seconds for the USB mass storage device after the start unit command.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 5.4 PnP/PCI Use the PCI/PnP menu (BIOS Menu 14) to configure advanced PCI and PnP settings. WARNING! Setting wrong values for the BIOS selections in the PCIPnP BIOS menu may cause the system to malfunction. ƒ IRQ# [Available] Use the IRQ# address to specify what IRQs can be assigned to a particular peripheral device.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure ƒ ƒ ƒ ƒ IRQ10 IRQ 11 IRQ 14 IRQ 15 ƒ DMA Channel# [Available] Use the DMA Channel# option to assign a specific DMA channel to a particular PCI/PnP device.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 5.5 BOOT Use the Boot menu (BIOS Menu 15) to configure system boot options. 5.5.1 BOOT SETTINGS CONFIGURATION Use the Boot Settings Configuration menu (BIOS Menu 16) to configure advanced system boot options. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure ƒ Quick Boot [Enabled] Use the Quick Boot BIOS option to make the computer speed up the boot process. Disabled No POST procedures are skipped Enabled DEFAULT Some POST procedures are skipped to decrease the system boot time ƒ Quiet Boot [Enabled] Use the Quiet Boot BIOS option to select the screen display when the system boots.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 5.5.2 BOOT DEVICE PRIORITY Use the Boot Device Priority menu (BIOS Menu 17) to specify the boot sequence from the available devices. The drive sequence also depends on the boot sequence in the individual device section. 5.5.3 HARD DISK DRIVES Use the Hard Disk Drives menu to specify the boot sequence of the available HDDs. Only installed hard drives are shown. 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 5.5.4 REMOVABLE DRIVES Use the Removable Drives menu (BIOS Menu 19) to specify the boot sequence of the removable drives. Only connected drives are shown. 5.5.5 CD/DVD DRIVES Use the CD/DVD Drives menu to specify the boot sequence of the available CD/DVD drives.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 5.6 SECURITY Use the Security menu (BIOS Menu 21) to set system and user passwords. ƒ Change Supervisor Password Use the Change Supervisor Password to set or change a supervisor password. The default for this option is Not Installed. If a supervisor password must be installed, select this field and enter the password. After the password has been added, Install appears next to Change Supervisor Password.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure ƒ Change User Password Use the Change User Password to set or change a user password. The default for this option is Not Installed. If a user password must be installed, select this field and enter the password. After the password has been added, Install appears next to Change User Password. 5.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure ƒ Memory Hole [Disabled] Use the Memory Hole option to reserve memory space between 15 MB and 16 MB for ISA expansion cards that require a specified area of memory to work properly. If an older ISA expansion card is used, please refer to the documentation that came with the card to see if it is necessary to reserve the space.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure ƒ DVMT Mode Select [DVMT Mode] Use the DVMT Mode Select option to select the Intel Dynamic Video Memory Technology (DVMT) operating mode. Fixed Mode A fixed portion of graphics memory is reserved as graphics memory. DVMT Mode DEFAULT Combo Mode Graphics memory is dynamically allocated according to the system and graphics needs. A fixed portion of graphics memory is reserved as graphics memory.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure ƒ LFP Current Jumper Setting Shows current value of the hardware jumper setting for the LVDS resolution. This is the value used when "BY HARDWARE" is selected in the setting above. 5.7.2 SOUTHBRIDGE CONFIGURATION The Southbridge Configuration menu (BIOS Menu 24) the Southbridge chipset to be configured. ƒ Audio Controller [Auto] Use the HDA Controller option to enable or disable High Definition audio codec.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure ƒ Save Changes and Exit Use the Save Changes and Exit option to save the changes made to the BIOS options and to exit the BIOS configuration setup program. ƒ Discard Changes and Exit Use the Discard Changes and Exit option to exit the BIOS configuration setup program without saving the changes made to the system. ƒ Discard Changes Use the Discard Changes option to discard the changes and remain in the BIOS configuration setup program.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure CHAPTER 6 SYSTEM MAINTENANCE 6.1 SYSTEM MAINTENANCE INTRODUCTION If the components of the PCH5120 fail they must be replaced, such as the wireless LAN module or the motherboard. Please contact the system reseller or vendor to purchase the replacement parts. Back cover removal instructions and jumper settings for the PCH5120 are described below. 6.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 6.4 MEMORY MODULE REPLACEMENT The flat panel PC has a preinstalled memory module. If the memory module fails, take the steps below to replace it. Step 1: Remove the back cover. See Section 6.3 above. Step 2: Locate the memory module on the motherboard of the flat panel PC Step 3: Remove the memory module by pulling both the spring retainer clips outward from the socket.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure Step 7: Check that the thermal pads are correctly placed on the back cover. The thermal pads transfer the heat from the system chipset to the external casing. Step 8: Replace the back cover. Step 9: Press down the cover firmly and tighten the screws to 7 kg-cm (6 lb-ft/0.68 Nm). 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure A. SAFETY PRECAUTIONS WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the PCH5120. A.1 Safety Precautions Please follow the safety precautions outlined in the sections that follow: A.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure A.1.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the PCH5120 may result permanent damage to the PCH5120 and sever injury to the user. in Electrostatic discharge (ESD) can cause serious damage to electronic components, including the PCH5120. Dry climates are especially susceptible to ESD.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure ƒ Never drop any objects or liquids through the openings. ƒ Be cautious of any possible allergic reactions to solvents or chemicals used when cleaning. ƒ Avoid eating, drinking and smoking nearby. A.2.2 Cleaning Tools Some components may only be cleaned using a product specifically designed for the purpose. In such case, the product will be explicitly mentioned in the cleaning tips. Below is a list of items to use for cleaning.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure B. BIOS CONFIGURATION OPTIONS ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ System Overview .................................................................................................................35 System Time [xx:xx:xx] .......................................................................................................36 System Date [xx/xx/xx] ....................................................................
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ Resume on Keyboard/Mouse [Disabled] ...........................................................................52 Resume on Ring [Disabled] ................................................................................................52 Resume on PCI-Express WAKE# [Enabled]......................................................................
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ DVMT Mode Select [DVMT Mode].......................................................................................72 DVMT/FIXED Memory [128 MB] ..........................................................................................72 Boot Display Device [Auto].................................................................................................72 Secondary Display Device [Auto] ............................
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure C. WATCHDOG TIMER NOTE: The following discussion applies to DOS environment. IEI support is contacted or the IEI website visited for specific drivers for more sophisticated operating systems, e.g., Windows and Linux. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash. This condition may have occurred by external EMIs or a software bug.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure Example program: ; INITIAL TIMER PERIOD COUNTER ; W_LOOP: MOV AX, 6F02H ;setting the time-out value MOV BL, 30 ;time-out value is 48 seconds INT 15H ; ; ADD THE APPLICATION PROGRAM HERE ; CMP EXIT_AP, 1 ;is the application over? JNE W_LOOP ;No, restart the application MOV AX, 6F02H ;disable Watchdog Timer MOV BL, 0 ; INT 15H ; ; EXIT ; 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure D. HAZARDOUS MATERIALS DISCLOSURE D.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PCH 5120 12.1” industrial Panel PC IP67 rated fully enclosure 14628 Central Blvd, Chino, CA91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
