PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC 7152 14” short depth server User Manual PC 8153: 15-inch Pentium 4 1024x768 touch panel PC 1 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PC 8153 15-inch touch panel PC PC 5150 Disclaimers 15-inch touch panel PC This manual has been carefully checked and believed to contain accurate information. ACNODES Co. assumes no responsibility for any infringements of patents or any third party 's rights, and any liability arising from such use. ACNODES does not warrant or assume any legal liability or responsibility for the accuracy, completeness or usefulness of any information in this document.
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC 7152 14” short depth server Safety Approvals CE MarkingFCC Class A FCC Compliance This equipment has been tested in compliance with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are meant to provide reasonable protection against harmful interference in a residential installation.
PC 8153 15-inch touch panel PC PC 5150 Safety Precautions 15-inch touch panel PC Before getting started, please read the following important safety precautions. 1. The PC 8153 Series does not come equipped with an operating system. An operating system must be loaded first before installing any software into the computer. 2. Be sure to ground yourself to prevent static charge when installing the internal components.
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC 7152 14” short depth server Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. This will help to discharge any static electricity on your body. When handling boards and components, wear a wrist- grounding strap, available from most electronic component stores. Trademarks Acknowledgments ACNODES is a trademark of ACNODES Co., Ltd.
PC 8153 15-inch touch panel PC PC 5150 15-inch touch panel PC C h a p t e r 1 Introduction This chapter contains general information and detailed specifications of the PC 8153. Chapter 1 includes the following sections: General Description System Specification Dimensions Front View & I/O Outlets Package List 6 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved.
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC 1.1 General Description 7152 14” short depth server The PC 8153 is a 15" Industrial panel PC which features Intel® Core™ 2 Duo processor and Intel® Q965 chipset to provide powerful computing performance. This panel PC also offers the expansion ability with two PCI slots. It adopts built-in speaker and WLAN module for wireless connectivity. Further, the PC 8153 fits in with Aluminum IP65/NEMA4 compliant front bezel.
PC 8153 15-inch touch panel PC PC 5150 1.2.2 I/O System 15-inch touch panel PC Standard I/O - Three serial ports with power, two RS-232 and one RS-232/422/485 - One PS/2 for Keyboard and Mouse Interface - Four USB Ports 2.
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC 1.3 Dimensions 7152 14” short depth server This diagram shows you dimensions and outlines of the PC8153. 9 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PC 8153 15-inch touch panel PC PC 5150 1.4 Front View and I/O Outlets 1.4.1 Front View 15-inch touch panel PC Please refer to the following illustration for features and controls of the PC 8153 front bezel. 1.4.2 I/O Outlets The following figure shows the I/O locations of the PC 8153. 10 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved.
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC 1.5 Package List 7152 14” short depth server The package bundled with your PC 8153 should contain the following items: PC 8153 x 1 AC power cord x 1 Panel mount kit x 7 Driver CDx1 LGA 775 CPU Cooler x 1 DVI TO VGA Adaptor x 1 PS/2 Splitter - Y Cable x 1 SATA Cable x 1 Dual 3.5" HDD bracket kit with fan x 1 (Optional) Small HDD Kit for 2.
PC 8153 15-inch touch panel PC PC 5150 C h a p t e r 2 Hardware Installation 15-inch touch panel PC The PC 8153 is convenient for your various hardware configurations in flexible ways, such as CPU (Central Processing Unit), HDD (Hard Disk Drive), Memory Module (DRAM), CD-ROM, Add-On card, and more. The chapter 2 will show you how to install the hardware. It includes: CPU DRAM Hard Disk CD-ROM Add-On Card Serial Port VGA Ethernet Mounting Ways 2.
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC Step 3 Install the CPU and DDR DRAM in the PC 8153 2.2 7152 14” short depth server Installing the the Hard Disk Drive The PC 8153 offers a convenient drive bay module for users to install HDD. The system offers users two 3.5" Hard Disk Drives for installation. If you want to install one or two 2.5" HDD, the PC 8153 also provides the 3.5" to 2.5" drive holder to meet your requirement.
PC 8153 15-inch touch panel PC PC 5150 Step 4 The installation is completed. 15-inch touch panel PC Installing Dual 3.5" HDD If installing the dual 3.5" HDD, please follow the steps: Step 1 Change HDD bracket from 3.5" to dual 3.5". Step 2 Fix the Hard Disk to the HDD bracket to complete the installation. 14 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved.
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC 7152 14” short depth server Note When installing Dual 3.5" HDD, users must install a fan to decrease system heat. Installation step as following: Installing fan when using dual 3.5" HDD Step 1 Screw the fan to the right side of cover. 15 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved.
PC 8153 15-inch touch panel PC PC 5150 15-inch touch panel PC Step 2 Connect power cable of fan to 3 pin fan connector (CN3) in motherboard. If installing the 2.5" HDD, please follow the steps: Step 1 Set the 2.5" HDD in the HDD bracket kit. 16 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice.
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC 7152 14” short depth server Step 2 Install the HDD in the PC 8153. 2.3 CD-ROM Installation The PC 8153 offers a convenient drive bay module for users to install CD-ROM. When installing the CD-ROM, refer to the following instructions and illustration: Step 1 Unscrew screws to remove the rear chassis. Step 2 Remove the riser card fix kit. Step 3 Unscrew 3 screws which are around the chassis. 17 661 Brea Canyon Rd.
PC 8153 15-inch touch panel PC PC 5150 2.4 Add-on Card Installation 15-inch touch panel PC The PC 8153 provides a riser card for PCI slots expansion. The riser card assembly can accommodate both half-size expansion cards. To install the riser card, refer to the following figure and instructions below: Step 1 Remove the rear chassis. Setp 2 Remove the riser card fix kit. Step 3 Remove plates. Step 4 Insert the add-on card in the socket firmly until it is completely seated. 18 661 Brea Canyon Rd.
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC 2.5 Serial Port Interface 7152 14” short depth server The PC 8153 has three onboard serial ports, COM1, COM2, and COM3. COM1 is RS-232(default)/422/485 Port Connector while COM2 and COM3 are RS-232 Port Connectors. The connector, COM1, COM2, COM3 are DB-9 connector, and the following table shows the pin assignments of this connector. 2.6 DVI-I The PC 8153 has a DVI-Iinterface connector.
PC 8153 15-inch touch panel PC PC 5150 15-inch touch panel PC NOTE It doesn't support display in LCD and DVI-D simultaneously. DVI-D is only available after booting up in Windows XP. 2.7 Ethernet The PC 8153 provides a NE2000 compatible Ethernet (RJ-45) interfaces. For network connection, just plug in one cable end of the system's 10/100/1000-Base-T Hub into a standard RJ-45 connector. Please refer to detailed pin assignment list below: 20 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC 2.8 Mountings Way - Panel 7152 14” short depth server There is one application option for the PC 8153, Panel mounting. Panel - Mount Kit Assembley The PC 8153 is designed for panel mount application. To mount the PC 8153, the standard set of mounting kit (included in the system packaging) is needed. 21 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc.
PC 8153 15-inch touch panel PC PC 5150 C h a p t e r 3 Phoenix-Award BIOS Utility 15-inch touch panel PC The Phoenix-Award BIOS provides users with a built-in Setup program to modify basic system configuration. All configured parameters are stored in a battery-backed-up RAM (CMOS RAM) to save the Setup information whenever the power is turned off. 3.1 Entering Setup There are two ways to enter the Setup program.
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC 7152 14” short depth server 3.4 The Main Menu Once you enter the Award BIOS CMOS Setup Utility, the Main Menu appears on the screen. In the Main Menu, there are several Setup functions and a couple of Exit options for your selection. Use arrow keys to select the Setup Page you intend to configure then press to accept or enter its sub-menu.
PC 8153 15-inch touch panel PC PC 5150 Date 15-inch touch panel PC The date format is , . Press to show the calendar. Time This item shows current time of your system with the format . The time is calculated based on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00. IDE Primary Master/Primary Slave These items identify the types of each IDE channel installed in the computer.
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC 7152 14” short depth server Press to return to the Main Menu page. 3.6 Advanced BIOS Features This section allows you to configure and improve your system, to set up some system features according to your preference. CPU Feature Scroll to this item and press to view the CPU Feature sub menu. 25 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc.
PC 8153 15-inch touch panel PC PC 5150 Hard Disk Boot Priority 15-inch touch panel PC Scroll to this item and press to view the sub menu to decide the disk boot priority. Virus Warning This option flashes on the screen. During and after the system boot up, any attempt to write to the boot sector or partition table of the hard disk drive will halt the system with the following message. You can run an anti-virus program to locate the problem. The default setting is "Disabled".
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC Quick Power On Self Test 7152 14” short depth server This option speeds up Power on Self Test (POST) after you turn on the system power. If set as Enabled, BIOS will shorten or skip some check items during POST. The default setting is "Enabled". First/Second/Third Boot Device These items let you select the 1st, 2nd, and 3rd devices that the system will search for during its boot-up sequence.
PC 8153 15-inch touch panel PC PC 5150 Typematic Rate (Chars/Sec) 15-inch touch panel PC This option refers to character numbers typed per second by the keyboard. The default value is "6". Typematic Delay (Msec) This option defines how many milliseconds must elapse before a held-down key begins generating repeat characters. The default value is "250". Security Option This item allows you to limit access to the system and Setup, or just to Setup. The default value is "Setup".
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC 3.7 Advanced Chipset Features 7152 14” short depth server This section contains completely optimized chipset 's features on the board that you are strongly recommended to leave all items on this page at their default values unless you are very familiar with the technical specifications of your system hardware.
PC 8153 15-inch touch panel PC PC 5150 Press to return to the Advanced Chipset Featurs page. 15-inch touch panel PC *** VGA Setting *** PEG/Onchip VGA Control Use this item to choose the primary display card. On-Chip Frame Buffer Size Use this item to set the VGA frame buffer size. DVMT Mode DVMT (Dynamic Video Memory Technology) helps you select the video mode.
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC On-Chip IDE Device 7152 14” short depth server Scroll to this item and press to view the sub menu On-Chip IDE Device. IDE HDD Block Mode Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your IDE hard drive supports block mode (most new drives do), select Enabled for automatic detection of the optimal number of block read/writes per sector the drive can support.
PC 8153 15-inch touch panel PC PC 5150 SATA Mode 15-inch touch panel PC There are these options for you to set up SATA mode: IDE, RAID or AHCI. NOTE ICH8DO supports AHCI under Microsoft Windows VISTA and Microsoft Windows XP. ICH8 only supports AHCI under Microsoft Windows VISTA. LEGACY Mode Support Legacy mode support allows devices to function in an operating environment that is not USB-aware. Press to return to the Integrated Peripherals page.
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC Parallel Port Mode 7152 14” short depth server Select an operating mode for the onboard parallel (printer) port. Select Normal unless your hardware and software require one of the other modes offered in this field. The options available are EPP1.9, ECP, SPP, ECPEPP1.7, EPP1.7. ECP Mode Use DMA Select a DMA channel for the parallel port for use during ECP mode.
PC 8153 15-inch touch panel PC PC 5150 3.9 Power Management Setup 15-inch touch panel PC The Power Management Setup allows you to save energy of your system effectively. It will shut down the hard disk and turn OFF video display after a period of inactivity. 34 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice.
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC ACPI Function 7152 14” short depth server This item allows you to enable/disable the Advanced Configuration and Power Management (ACPI). The function is always "Enabled". ACPI Suspend Type This item specifies the power saving modes for ACPI function.
PC 8153 15-inch touch panel PC PC 5150 Video Off In Suspend 15-inch touch panel PC This item defines if the video is powered down when the system is put into suspend mode. Suspend Type If this item is set to the default Stop Grant, the CPU will go into Idle Mode during power saving mode. Moden Use IRQ If you want an incoming call on a modem to automatically resume the system from a power saving mode, use this item to specify the interrupt request line (IRQ) used by the modem.
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC ** Reload Global Timer Events ** 7152 14” short depth server Global Timer (power management) events can prevent the system from entering a power saving mode or can awaken the system from such a mode. Primary/Secondary IDE 0/1 Use this item to configure the IDE devices monitored by the system. FDD, COM, LPT Port Use this item to configure the FDD, COM and LPT ports monitored by the system.
PC 8153 15-inch touch panel PC PC 5150 3.10 PnP/PCI Configuration Setup 15-inch touch panel PC This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its own special components. This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings.
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC 7152 14” short depth server Some non-standard VGA display cards may not show colors properly. This item allows you to set whether MPEG ISA/VESA VGA Cards can work with PCI/VGA or not. When enabled, a PCI/VGA can work with a MPEG ISA/VESA VGA card; when disabled, a PCI/VGA cannot work with a MPEG ISA/VESA Card.
PC 8153 15-inch touch panel PC PC 5150 3.12 Frequency/Voltage Control 15-inch touch panel PC This section is to control the CPU frequency and Supply Voltage, DIMM OverVoltage and AGP voltage. CPU Clock Ratio Use this item to select the CPU's frequency. Auto Detect PCI Clk The enabled item can automatically disable the clock source for a PCI slot without a module, to reduce EMI (Electro Magnetic Interference).
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC 3.13 Load Optimized Defaults 7152 14” short depth server This option allows you to load the default values to your system configuration. These default settings are optimal and enable all high performance features. To load SETUP defaults value to CMOS SRAM, enter "Y". If not, enter "N". 3.14 Set Supervisor/User Password You can set either supervisor or user password, or both of then. The differences between are: 1.
PC 8153 15-inch touch panel PC PC 5150 3.15 Save & Exit Setup 15-inch touch panel PC This allows you to determine whether or not to accept the modifications. Typing "Y" quits the setup utility and saves all changes into the CMOS memory. Typing "N" brigs you back to Setup utility. 3.16 Exit Without Saving Select this option to exit the Setup utility without saving the changes you have made in this session. Typing "Y" will quit the Setup utility without saving the modifications.
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC C h a p t e r 4 Driver Installation 4.1 7152 14” short depth server System PC 8153 supports Windows 2000/XP/Vista. To facilitate the installation of the system driver, please carefully read the instructions in this chapter before start installing. 1. Here is the path for the system driver: Panel series\PC 8153\Driver 2. Select all files, follow the installing procedure, and finally press OK. 43 661 Brea Canyon Rd.
PC 8153 15-inch touch panel PC PC 5150 4.2 Touch Screen 15-inch touch panel PC 4.2.1 Specification 4.2.2 Driver Installation - Windows 2000/XP/Vista The PC 8153 provides a driver of the touch screen that users can install it under operating system Windows 2000/XP/Vista. To facilitate this touch screen driver installation, users should read the instructions in this chapter carefully before start the installation. 1.
PC 8153RMC 7152 15-inch touch panel PC 14” short depth serverRMC 4. Select the "Standard Calibrate" tab. 7152 14” short depth server 5. Calibration: To adjust the display with touch panel, click "Calibration" and follow the calibrate point to do calibration; there are five points on screen for calibration. 6. Press OK. 4.2.3 Driver Installation - DOS Using "INSTALL.EXE" Utility to Install Pen Mount Software Driver 1.
PC 8153 15-inch touch panel PC PC 5150 Identify the Communication Port and IRQ Number 15-inch touch panel PC 1. For the first time installation, or changing Pen Mount Touch Screen's COM port, use PMDETECT (e.g. C:\PEN MOUNT\PMDETECT) to check the COM port and IRQ number. PMDETECT will save the correct data to PMOUSE.CFG file for further use. 2. The driver detects your communication COM port and IRQ number from COM1 IRQ4, COM2 IRQ3, COM3…. to COM4 IRQ15.
