PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server User Manual PC 5172: 17-inch Pentium 4 1280x1024 sunlight readable touch panel PC 1 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 OPERATION MANUAL 15-inch touch panel PC COPYRIGHT NOTICE This operation manual is meant to assist users in installing and setting up the system. The information contained in this document is subject to change without prior any notice. This manual is copyrighted August, 2010. You may not reproduce or transmit in any form or by any means, electronic, or mechanical, including photocopying and recording.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server If any of the components listed in the checklist below are missing, please do not proceed with the installation. Contact the ACNODES reseller or vendor you purchased the PC 5172 from or contact an ACNODES sales representative directly. To contact an ACNODES sales representative, please send an email tosales@Acnodes.com.tw. The items listed below should all be included in the PC 5172 package.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 1.1 General Overview 15-inch touch panel PC Figure 1-1: PC 5172 The PC 5172 flat panel PC is for industrial environments like production lines and machine automation. The PC 5172 provides all the features of a PC, combined with a touch panel screen for mouse and keyboard free data input. The PC 5172 provides wired and, optionally, wireless networking for integration into company networks.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server 1.1.2 Applications The PC 5172 flat panel PC is designed for rigorous industrial environments where it may be exposed to both heat and moisture. Its durability and strength also makes it an ideal choice for public access computers.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 1.2.1 Front Panel 15-inch touch panel PC The front panel of the PC 5172 (Figure 1-2) is a flat panel TFT LCD screen surrounded by an aluminum frame. Figure 1-2: Front View 1.2.2 Rear Panel The rear panel has a fan vent, four VESA standard mounting holes and several retention screw holes. The VESA mounting holes are circled in Figure 1-3. Figure 1-3: PC 5172 Rear View 6 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 1.2.3 Top Panel 14” short depth server The top panel has two fan vents, eight mounting clamp slots and three retention screws for securing the drive bay bracket. The retention screws are circled in Figure 1-4 below. Figure 1-4: PC 5172 Top View 1.2.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 15-inch touch panel PC Figure 1-5: Bottom View 1.2.5 Left Panel The left side panel has two fan vents and four retention screws for securing the two internal fans. The retention screws are circled in Figure 1-6. Figure 1-6: Left View 1.2.6 Right Panel The right side panel provides access to a slim type CD drive bay and a FDD drive bay shown in Figure 1-7. 8 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server Figure 1-7: Right View 1.3 Internal Overview The PC 5172 internal components are configured in three levels. The PSU cover bracket to the left (Figure 1-8) supports the hard drive and optical drive brackets. Below the PSU cover bracket is the power supply. On the same level as the power supply is the motherboard. Below the motherboard and PSU level is an LCD panel.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 2.1 Introduction 15-inch touch panel PC The PC 5172 flat panel PC has the following preinstalled components: 1 x Motherboard 1 x TFT LCD screen 1 x Power supply 2 x Cooling fans The technical specifications for these components and the system are shown in the sections below. 2.1.1 System Specifications The technical specifications for the PC 5172 system are listed in Table 2-1. 10 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server 11 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 Table 2-1: PC 5172 Specifications 15-inch touch panel PC 2.1.2 Motherboard Specifications The PC 5172 comes with a 9455 motherboard. The technical specifications of the motherboard are listed in Table 2-2. 12 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server Table 2-2: Motherboard Specifications 2.1.3 Flat Panel Screen The PC 5172 comes with a flat panel TFT LCD screen. Screen specifications for each model are detailed below. 2.1.3.1 PC 5152 Screen The PC 5172 comes with a 19" TFT LCD monitor at the front of the flat panel PC. The specifications for the LCD monitor are shown in Table 2-3 below. 13 661 Brea Canyon Rd.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 15-inch touch panel PC Table 2-3: 17" TFT LCD Monitor Specifications 2.1.3.2 PC 5172Screen The PC 5172 comes with a 19" TFT LCD monitor at the front of the flat panel PC. The specifications for the LCD monitor are shown in Table 2-4 below. 14 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server Table 2-4: 17" TFT LCD Monitor Specifications 2.1.3.3 PC 5192Screen The PC 5172 comes with a 17" TFT LCD monitor at the front of the flat panel PC. The specifications for the LCD monitor are shown in Table 2-5 below. 15 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 15-inch touch panel PC Table 2-5: 17" TFT LCD Monitor Specifications 2.1.4 Power Supply The PC 5172 flat panel PC comes with either an PS-4518AP 180 W AC-DC 1U, or PS-4520C 200 W DC 1U RoHS compliant ATX power supply. The PSUs have an MTBF greater than 100,000 hours. 2.1.4.1 PS-4518AP Power Supply Specifications for the PS-4518AP PSU module are shown in (Table 2-6). 16 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server Table 2-6: PS-4518AP Power Supply Specifications 17 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 2.1.4.2 PS-4520C Power Supply 15-inch touch panel PC Specifications for the PS-4520C PSU module are shown in (Table 2-7). Table 2-7: PS-4520C Power Supply Specifications 2.2 Dimensions The dimensions of the PC 5172 are shown in the sections below. 18 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server 2.2.3 PC 5192 Dimension The dimensions of the PC 5172flat panel PC are shown in Figure 2-3 below. 19 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 2.3 Motherboard 15-inch touch panel PC The PC 5172 flat screen PC contains a 9455 motherboard. The motherboard is the heart of any computer and is responsible for transmitting, receiving and processing data as well as driving the different on-board devices. This chapter gives a brief introduction to the 9455 motherboard. For more complete details on the connectors and the different implementations of the 9455, please refer to the 9455 user manual.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 2.5.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 High-Precision Event Timers 15-inch 1.5 V operation with 3.3 V I/O o 5 V tolerant buffers on IDE, PCI, USB Overcurrent and Legacy signals touch panel PC Integrated 1.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server Figure 2-5: SO-DIMM Socket 2.8 Storage There following storage options are available: CompactFlash® SATA hard drive 2.8.1 CompactFlash The CompactFlash® socket supports standard CompactFlash® Type I and CompactFlash® Type II cards. The chipset flash interface is multiplexed with an IDE interface and can be connected to an array of industry standard NAND Flash or NOR Flash devices.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 2.8.2 SATA Hard Drive 15-inch touch panel PC The integrated SATA controller supports two SATA drives with independent DMA operations. One SATA port is implemented internally for the internal 2.5" SATA hard drive. The second SATA port is implemented on the external connector panel through an eSATA connector. SATA controller specifications are listed below. Supports two SATA drives Supports 3.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 2.10 External Device Connectors 14” short depth server The external device connectors allow external components to be attached to the PC 5172 . The external communications device connectors are shown in the sections below. 2.10.1 USB 2.0 Ports USB connections provide fast data transmission to external devices including USB flash disks. Figure 2-9: USB Ports Some of the features of the USB ports include USB 2.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 15-inch touch panel PC The parallel port can be programmed for machine control, or used in the standard setup for parallel port printers and other devices that use a standard parallel port. Figure 2-11: Parallel Port Some of the features of the parallel port include: Programmable pin functions for customized applications Standard setup connects to devices with a standard parallel port, like printers 2.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 2.12 Front Panel 14” short depth server The front panel of the PC 5172 consists of an LCD monitor and a touch screen panel. 2.12.1 Flat Screen The PC 5172 comes with a TFT LCD monitor. The tough construction of the TFT monitor allows the PC 5172 to withstand the conditions it is likely to be exposed to during regular use. Some of the specifications of the TFT monitors are shown below: Pixel pitch of 0.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 3.1 Anti-static Precautions 15-inch touch panel PC WARNING! Failure to take ESD precautions during the installation of the PC 5172 may the PC 5172 and severe injury to the user. result in permanent damage to Electrostatic discharge (ESD) can cause serious damage to electronic components, including the PC 5172 . Dry climates are especially susceptible to ESD.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server Table 3-1: Package List Contents 29 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 4.1 Installation Precautions 15-inch touch panel PC When installing the PC 5172 , please follow the precautions listed below: Turn power off: When installing the PC 5172 make sure the power is off. Failing to turn off the power may cause severe injury to the body and/or damage to the system. Certified Engineers: Only certified engineers should install and modify on-board functions. Mounting: The PC 5172 is a heavy device.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server 4.4 Remove the Back Cover Remove all the retention screws on the back cover. Lift the cover up to remove (Figure 4-1). Figure 4-1: Back Cover Retention Screws 4.5 Jumper Settings NOTE: These jumper settings and the jumper locations are described in detail in the user manual that came with the 9455 motherboard. Please refer to the manual for more detailed descriptions of the jumper settings.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 4.5.1 AT/ATX Power Selection (AT_PWR_SW1) 15-inch touch panel PC The AT/ATX power selection switch selects AT or ATX power for the PC 5172. ATX power has more power saving capabilities than AT power. The AT/ATX selection jumper is connected to the AT/ATX switch on the I/O panel of the PC 5172. Table 4-2: AT/ATX Power Selection 4.5.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server Table 4-4: LCD Resolution Settings Pins 5-8 adjust the monitor setup on the system. Table 4-5: Monitor Settings 33 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 4.5.5 COM Port RI and Voltage Selection (JP3, JP4, JP5, JP6, JP8) 15-inch touch panel PC Use the COM port settings jumpers to select the voltage of serial port pin 9. Table 4-7: COM1 RI and Voltage Selection Jumper Table 4-8: COM2 RI and Voltage Selection Jumper Table 4-9: COM3 RI and Voltage Selection Jumper Table 4-10: COM4 RI and Voltage Selection Jumper Table 4-11: COM5 RI and Voltage Selection Jumper 34 661 Brea Canyon Rd.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 4.5.6 COM5 RS-232/422/485 Settings 14” short depth server To enable RS-232, RS-422 or RS-485 on COM5, all the following jumpers should be setup. 4.5.6.1 COM5 RS-232/422/485 RX Select (J2) Jumper J2 sets the COM5 serial port as RS-232, RS-422 or RS-485. Table 4-12: COM5 RS-232/422/485 RX Select 4.5.6.2 COM5 RS-422/485 TX Select (J3) Jumper J3 sets the COM5 serial port as RS-422 or RS-485. 4.5.6.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 4.5.8 Touch Screen Selection (JP7) 15-inch touch panel PC The touch screen selection jumper selects the type of touch screen panel connected to the system. Table 4-17: Touch Screen Selection 4.6 Drive Installation The drive installation process is shown in the sections below. The installation process of the following drives are shown. 4.6.1 Hard Drive Installation................................................................... 47 4.6.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server Figure 4-3: HDD SATA Connector Step 4: Attach the hard drive in the bracket. To do this, slide the hard drive onto the bracket until it connects with the SATA connector at the back. Fasten the four retention screws on the side.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 4.6.2 CompactFlash® Installation 15-inch touch panel PC To install the CompactFlash® card, please follow the steps below: Step 1: Undo the CompactFlash® slot cover screw and remove the CompactFlash cover plate. Figure 4-6: CompactFlash® Cover Plate Step 2: Insert the CompactFlash® card into the slot. Figure 4-7: CompactFlash® Slot Step 3: Fasten the CompactFlash® cover plate. Figure 4-8: CompactFlash® Cover Plate 38 661 Brea Canyon Rd.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 4.6.3 CD Drive Installation 14” short depth server To install a CD drive, please follow the steps below. Step 1: Remove the back cover (Section 4.4). Step 2: Attach the CD drive adapter to the CD-ROM if it is an IDE drive (if it is a SATA drive, proceed to Step 5:).
PC 5172 17-inch sunlight readable touch panel PC PC 5150 Figure 4-10: CD Drive Retention Screws 15-inch touch panel PC Step 6: Remove the four screws from the optical drive bracket assembly. Remove the blank drive plate. Figure 4-11: Optical Drive Blank Plate Assembly Step 7: Install the optical drive in the same position as the previously removed blank optical drive plate. Fasten the same four screws to attach the optical drive to the bracket.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server Figure 4-13: Optical Drive SATA Cable Step 9: Reinstall the optical drive bracket into the PC 5172 and fasten the optical bracket screws. Figure 4-14: Optical Drive Bracket Screws 4.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 4.7.1 Wall Mounting 15-inch touch panel PC To mount the PC 5172 flat panel PC onto a wall, please follow the steps below. Step 1: Select the location on the wall for the wall-mounting bracket. Step 2: Carefully mark the locations of the four bracket screw holes on the wall. Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention screws. Step 4: Align the wall-mounting bracket screw holes with the pilot holes.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 Figure 4-16: Mount the Chassis 14” short depth server Step 9: Secure the panel PC with the wall-mounting kit. To do this, stick the protective cushion to the wall-mounting kit first. Then, put the wall-mounting kit on the top panel of the panel PC. Carefully mark the location of the wall-mounting kit screw holes on the wall. Drill a pilot hole at the marked location on the wall.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 4.7.2 Panel/ Mounting 15-inch touch panel PC To mount the PC 5172 flat panel PC into a panel, please follow the steps below. NOTE: The maximum panel thickness should be no more than 6 mm. Step 1: Select the position on the panel to mount the PC 5172 . Step 2: Cut out a section of the panel that corresponds to the rear panel dimensions of the PC 5172 . The recommended cutout sizes are shown below (Figure 4-18, Figure 4-19 and Figure 4-20).
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server Step 3: Slide the PC 5172 through the hole until the metal frame is flush against the panel. Step 4: Insert the panel mounting clamps into the pre-formed holes along the edges of the PC 5172 , behind the metal frame (Figure 4-21). Refer to the mounting kit packing list for the required number of mounting clamps.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 4.7.3 Rack and Cabinet Installation 15-inch touch panel PC To mount the PC 5172 into a rack/cabinet, please follow the steps below. Step 1: Secure the rack mounting bracket to two sides of the monitor using the supplied retention screws (Figure 3-17). Each bracket requires four screws. Step 2: Secure the rack mounting bracket to the rack by inserting and tightening the supplied mounting nuts and bolts (Figure 3-17).
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server Step 4: Secure the PC 5172 to the interface pad by inserting four retention screws through the mounting arm interface pad and into the PC 5192 flat panel PC. 4.8 External Peripheral Interface Connectors 4.8.1 LCD Panel Connection A conventional CRT VGA 15-pin female D-SUB connector is located on the bottom panel to connect the PC 5172 flat panel PC to a second monitor.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 5.1 Introduction 15-inch touch panel PC A licensed copy of AMI BIOS is preprogrammed into the ROM BIOS. The BIOS setup program allows users to modify the basic system configuration. This chapter describes how to access the BIOS setup program and the configuration options that may be changed. 5.1.1 Starting Setup The AMI BIOS is activated when the computer is turned on. The setup program can be activated in one of two ways. 1.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 5.1.4 Unable to Reboot After Configuration Changes 14” short depth server If the computer cannot boot after changes to the system configuration is made, CMOS defaults. Use the jumper described in Section 4.5. 5.1.5 BIOS Menu Bar The menu bar on top of the BIOS screen has the following main items: - Main Changes the basic system configuration. - Advanced Changes the advanced system settings.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 System Overview 15-inch touch panel PC The System Overview lists a brief summary of different system components. The fields in System Overview cannot be changed.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server BIOS Menu 2: Advanced 5.3.1 CPU Configuration Use the CPU Configuration menu (BIOS Menu 3) to view detailed CPU specifications and configure the CPU. BIOS Menu 3: CPU Configuration 51 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 The CPU Configuration menu (BIOS Menu 3) lists the following CPU details:touch 15-inch panel PC - Manufacturer: Lists the name of the CPU manufacturer - Brand String: Lists the brand name of the CPU being used - Frequency: Lists the CPU processing speed - FSB Speed: Lists the FSB speed - Cache L1: Lists the CPU L1 cache size - Cache L2: Lists the CPU L2 cache size - Max CPUID Value Limit [Disabled] The Max CPUID Value Limit option to allow an olde
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server ATA/IDE Configurations [Enhanced] Use the ATA/IDE Configurations option to configure the ATA/IDE controller. Disabled Disables the on-board ATA/IDE controller. Compatible Configures the on-board ATA/IDE controller to be in compatible mode. In this mode, a SATA channel will replace one of the IDE channels. This mode supports up to 4 storage devices.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 5.3.2.1 IDE Master, IDE Slave 15-inch touch panel PC Use the IDE Master and IDE Slave configuration menu to view both primary and secondary IDE device details and configure the IDE devices connected to the system. BIOS Menu 5: IDE Master and IDE Slave Configuration Auto-Detected Drive Parameters The "grayed-out" items in the left frame are IDE disk drive parameters automatically detected from the firmware of the selected IDE disk drive.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server Type [Auto] Use the Type BIOS option select the type of device the AMIBIOS attempts to boot from after the Power-On Self-Test (POST) is complete. Not Installed BIOS is prevented from searching for an IDE disk drive on the specified channel. Auto DEFAULT The BIOS auto detects the IDE disk drive type attached to the specified channel.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 DMA Mode [Auto] Use the DMA Mode BIOS selection to adjust the DMA mode options. 15-inch touch panel Auto DEFAULT PC BIOS auto detects the DMA mode. Use this value if the IDE disk drive support cannot be determined. SWDMA0 Single Word DMA mode 0 selected with a maximum data transfer rate of 2.1 MB/s SWDMA1 Single Word DMA mode 1 selected with a maximum data transfer rate of 4.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 5.3.3 Floppy Configuration 14” short depth server Use the Floppy Configuration menu (BIOS Menu 6) to configure the floppy disk drive connected to the system. BIOS Menu 6: IDE Master and IDE Slave Configuration Floppy A/B Use the Floppy A/B option to configure the floppy disk drive. Options are listed below: Disabled 360 KB 51/4" 1.2 MB 51/4" 720 KB 31/2" 1.44 MB 31/2' 2.88 MB 31/2" 57 661 Brea Canyon Rd.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 5.3.4 Super IO Configuration 15-inch touch panel PC Use the Super IO Configuration menu (BIOS Menu 7) to set or change the configurations for the FDD controllers, parallel ports and serial ports. BIOS Menu 7: Super IO Configuration Digital I/O Address [2D8] Use the Digital I/O Address option to select the digital I/O port base address.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server Serial Port1 Mode [Normal] Use the Serial Port1 Mode option to select the transmitting and receiving mode for the first serial port. Normal DEFAULT IrDA Serial Port 1 mode is normal Serial Port 1 mode is IrDA ASK IR Serial Port 1 mode is ASK IR Serial Port2 Address [2F8/IRQ3] Use the Serial Port2 Address option to select the Serial Port 2 base address.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 ECP+EPP The parallel port operates in the extended capabilities portpanel (ECP) mode. 15-inch touch PC The ECP mode supports bi-directional communication between the system and the parallel port device and the transmission rates between the two are much faster than the Normal mode. The parallel port is also be compatible with EPP devices described above.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server 5.3.5 Hardware Health Configuration The Hardware Health Configuration menu (BIOS Menu 8) shows the operating temperature, fan speeds and system voltages. BIOS Menu 8: Hardware Health Configuration 61 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 CPU FAN 1 Mode Setting [Full On Mode] 15-inch touch panel PC Use the CPU FAN 1 Mode Setting option to configure the CPU fan. Full On Mode DEFAULT Fan is on all the time FAN x Mode Setting [Automatic Mode] Use the FAN x Mode Setting option to configure the second fan. Full On Mode Fan is on all the time Automatic mode DEFAULT Fan is off when the temperature is low enough. Parameters must be set by the user.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 short depth The Temperature Limit of Start option can only be set if the FAN14” x Mode Setting option server is set to Automatic Mode. Use the Temperature Limit of Start option to select the CPU temperature at which the cooling fan should automatically turn on. When the fan starts, it rotates using the starting pulse width modulation (PWM) specified in the Fan Start PWM option.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 The following system parameters and values are shown. The system parameters thatpanel are monitored 15-inch touch PC are: System Temperatures: The following system temperatures are monitored o CPU Temperature o System Temperature 1 o System Temperature 2 Fan Speeds: The CPU cooling fan speed is monitored. o CPU Fan1 Speed o Fan 1 Speed o Fan 2 Speed o Fan 3 Speed Voltages: The following system voltages are monitored o CPU Core o +3.30 V o +5.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server Power Supply Mode [ATX] Use the Power Supply Mode BIOS option to select the power supply that is connected to the system. AT power An AT power supply is connected to the system and no advanced power management features are enabled. ATX power DEFAULT An ATX power supply is connected to the system and the advanced power management features are enabled. 5.3.6.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 5.3.6.2 APM Configuration 15-inch touch panel PC The APM Configuration menu (BIOS Menu 11) allows the advanced power management options to be configured. BIOS Menu 11:Advanced Power Management Configuration Power Button Mode [On/Off] Use the Power Button Mode BIOS to specify how the power button functions.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server Resume on Ring [Disabled] Use the Resume on Ring BIOS option to enable activity on the RI (ring in) modem line to rouse the system from a suspend or standby state. That is, the system will be roused by an incoming call on a modem.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 5.3.7 Remote Access Configuration 15-inch touch panel PC Use the Remote Access Configuration menu (BIOS Menu 12) to configure remote access parameters. The Remote Access Configuration is an AMIBIOS feature and allows a remote host running a terminal program to display and configure the BIO settings.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server Serial Port Number [COM1] Use the Serial Port Number option allows to select the serial port used for remote access. COM1 DEFAULT System is remotely accessed through COM1 COM2 System is remotely accessed through COM2 NOTE: Make sure the selected COM port is enabled through the Super I/O configuration menu.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 15-inch touch panel PC 5.3.8 USB Configuration Use the USB Configuration menu (BIOS Menu 13) to read USB configuration information and configure the USB settings. BIOS Menu 13: USB Configuration USB Configuration The USB Configuration field shows the system USB configuration. The items listed are: Module Version: x.xxxxx.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 5.3.8.1 USB Mass Storage Device Configuration 14” short depth server Use the USB Mass Storage Device Configuration menu (BIOS Menu 14) to configure USB mass storage class devices. BIOS Menu 14: USB Mass Storage Device Configuration USB Mass Storage Reset Delay [20 Sec] Use the USB Mass Storage Reset Delay option to set the number of seconds POST waits for the USB mass storage device after the start unit command.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 15-inch touch panel PC Auto Floppy DEFAULT BIOS auto-detects the current USB. The USB device will be emulated as a floppy drive. The device can be either A: or B: responding to INT13h calls that return DL = 0 or DL = 1 respectively. Forced FDD Hard Disk Allows a hard disk image to be connected as a floppy image. This option works only for drives formatted with FAT12, FAT16 or FAT32.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server IRQ# [Available] Use the IRQ# address to specify what IRQs can be assigned to a particular peripheral device.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 5.5 Boot 15-inch touch panel PC Use the Boot menu (BIOS Menu 16) to configure system boot options. BIOS Menu 16: Boot 74 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 5.5.1 Boot Settings Configuration 14” short depth server Use the Boot Settings Configuration menu (BIOS Menu 17) to configure advanced system boot options. BIOS Menu 17: Boot Settings Configuration Quick Boot [Enabled] Use the Quick Boot BIOS option to make the computer speed up the boot process.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 15-inch touch panel PC Bootup Num-Lock [On] Use the Bootup Num-Lock BIOS option to specify if the number lock setting must be modified during boot up. Off Does not enable the keyboard Number Lock automatically. To use the 10-keys on the keyboard, press the Number Lock key located on the upper left-hand corner of the 10-key pad. The Number Lock LED on the keyboard lights up when the Number Lock is engaged.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 5.5.3 Hard Disk Drives 14” short depth server Use the Hard Disk Drives menu to specify the boot sequence of the available HDDs. When the menu is opened, the HDDs connected to the system are listed as shown below: 1st Drive 2nd Drive 3rd Drive 4th Drive [HDD: PM-(part number)] [HDD: PS-(part number)] [HDD: SM-(part number)] [HDD: SM-(part number)] NOTE: Only the drives connected to the system are shown.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 15-inch touch panel PC 5.5.4 CD/DVD Drives Use the CD/DVD Drives menu to specify the boot sequence of the available CD/DVD drives. When the menu is opened, the CD drives and DVD drives connected to the system are listed as shown below: 1st Drive 2nd Drive 3rd Drive 4th Drive [CD/DVD: PM-(part ID)] [HDD: PS-(part ID)] [HDD: SM-(part ID)] [HDD: SM-(part ID)] NOTE: Only the drives connected to the system are shown.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 5.6 Security 14” short depth server Use the Security menu (BIOS Menu 21) to set system and user passwords. BIOS Menu 21: Security Change Supervisor Password Use the Change Supervisor Password to set or change a supervisor password. The default for this option is Not Installed. If a supervisor password must be installed, select this field and enter the password.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 15-inch touch panel PC 5.7 Chipset Use the Chipset menu (BIOS Menu 22) to access the Northbridge and Southbridge configuration menus WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 Flat Panel Type [By Jumper] 14” short depth server Use the Flat Panel Type is set using the onboard jumper settings. The jumper settings can be found in the Installation and Configuration chapter. PID Current Jumper Setting [1-1024x768x24] The PID Current Jumper Setting shows the current setting of the flat panel resolution jumper.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 Audio Controller [Azalia] 15-inch touch panel PC Use the Audio Controller Selection option to enable or disable the High Definition Audio CODEC. Disabled The onboard HD Audio is disabled Azalia DEFAULT The onboard HD Audio is enabled 5.8 Exit Use the Exit menu (BIOS Menu 25) to load default BIOS values, optimal failsafe values and to save configuration changes.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 6.1 Available Software Drivers 14” short depth server NOTE: The content of the CD may vary throughout the life cycle of the product and is subject to change without prior notice. You may visit the ACNODES website or contact technical support for the latest updates. The following drivers can be installed on the system.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 Step 2: Double-click the infinst_Autol.exe icon. 15-inch touch panel PC Step 3: The welcome screen in Figure 6-2 appears. Figure 6-2: Chipset Driver Installation Welcome Screen Step 4: Click NEXT to continue the installation process. Step 5: The license agreement in Figure 6-3 appears. Figure 6-3: Chipset Driver Installation License Agreement Step 6: Read the license agreement.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server Figure 6-4: Chipset Driver Readme File Information Step 8: Read the Readme file information and then click NEXT to start the driver installation. Step 9: The Setup Progress windows appears (Figure 6-5). Figure 6-5: Chipset Driver Installation Complete 85 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 Step 10: After the driver installation process is complete click NEXT to continue 15-inch touch panel PC Step 11: The Setup is Complete windows appears (Figure 6-6). Figure 6-6: Chipset Driver Installation Complete Step 12: The computer must be restarted for changes to take effect.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth Step 2: Double-click the setup icon to start the graphics driver installation (Figure 6-7).server Step 3: A new window appears with a detailed explanation of what is contained in the graphics driver file (Figure 6-8). Figure 6-8: VGA Driver Step 4: Click NEXT to continue the driver installation process (Figure 6-8). Step 5: The Graphics driver welcome screen appears (Figure 6-9).
PC 5172 17-inch sunlight readable touch panel PC PC 5150 15-inch Step 6: Click NEXT to continue the driver installation (Figure 6-9). touch panel PC Step 7: The license agreement appears (Figure 6-10). Figure 6-10: Graphics Driver License Agreement Step 8: Read the license agreement carefully. Click YES to accept the terms of the license agreement and continue installation. Step 9: A new window appears with details of the drivers to be installed (Figure 6-11).
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14”details short server Step 11: The driver installation progress window appears and shows fordepth each of the drivers as they are installed (Figure 6-12). Figure 6-12: Graphics Driver Installation Notice Step 12: The Setup is Complete window appears. (Figure 6-13). Figure 6-13: Graphics Driver Installation Complete 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 Step 13: The confirmation screen offers the option of restarting the computertouch now or later. 15-inch panel PC For the settings to take effect, the computer must be restarted. Click FINISH to restart the computer. 6.4 Gigabit Ethernet Driver Installation NOTE: Two different Gigabit Ethernet driver versions are included. These versions correspond to two releases of the PC 5152 . Windows will automatically select the correct one.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14”tabshort Step 3: Select the Hardware tab and click the DEVICE MANAGER (Figuredepth 6-16). server Figure 6-16: Device Manager Tab Step 4: Right-click the "Ethernet Controller" and select "Update Driver…" to start the driver update process (Figure 6-17). Figure 6-17: Device Manager List 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 Step 5: The Device Driver Wizard appears (Figure 6-18). 15-inch touch panel PC Figure 6-18: Search Windows Update Prompt Step 6: Select "No, not this time" to force the wizard to search hard drives, CD drives and floppy drives for a driver and not connect to the Internet to search for the appropriate driver (Figure 6-18). Step 7: The automatic driver search prompt appears (Figure 6-19).
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14”the short depth Step 9: After the installation wizard finds the Gigabit Ethernet driver, Hardware server Update Completed window appears (Figure 6-20). Figure 6-20: Hardware Installation Complete Step 10: Click FINISH to exit the installation wizard and complete the installation process. 6.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 Step 2: Double-click the Setup icon. 15-inch touch panel PC Step 3: The audio setup window appears (Figure 6-22). Figure 6-22: Audio Driver Installation Step 4: Click NEXT to start the driver installation (Figure 6-22). Step 5: The audio driver installation begins. Step 6: The Windows logo testing warning screen is shown. The warning explains that the software has not passed Windows logo testing.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” shortnow depth server Step 7: The confirmation screen offers the option of restarting the computer or later. For the settings to take effect, the computer must be restarted. Click FINISH to restart the computer. Figure 6-24: InstallShield Wizard Complete 6.6 Touch Panel Driver To install the touch panel driver, please follow the steps below. Step 1: Browse to the Touch directory on the installation CD (Figure 6-25).
PC 5172 17-inch sunlight readable touch panel PC PC 5150 15-inch touch panel PC Figure 6-26: Touch Panel Driver Welcome Screen Step 4: Click NEXT to begin the touch panel driver installation process (Figure 6-26). Step 5: The license agreement window appears (Figure 6-27). Figure 6-27: Touch Panel License Agreement Step 6: Read the license agreement carefully. Click I AGREE to accept the terms of the agreement and proceed with the Installation (Figure 6-27).
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server Figure 6-28: Touch Panel Installation Directory Step 8: Accept the default installation directory (only change if necessary) then click INSTALL to install the touch panel drivers (Figure 6-28). Step 9: The touch panel driver begins installing (Figure 6-29). Figure 6-29: Touch Panel Drivers Installing Step 10: The Windows logo testing warning screen is shown.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 15-inch touch panel PC Figure 6-30: Windows Logo Testing Step 11: The InstallShield Wizard Completed window appears (Figure 6-31). Figure 6-31: InstallShield Wizard Complete Step 12: Click FINISH to complete the installation process and exit 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com © Copyright 2009 Acnodes, Inc. All rights reserved.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 7.1 System Maintenance Introduction 14” short depth server The following system components may require maintenance. Motherboard DIMM module PSU module Cooling fans If these components fail, they must be replaced. Please contact the system reseller or vendor to purchase replacement parts. Replacement instructions for the above listed components are described below. 7.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 15-inch touch panel PC Figure 7-1: DIMM Socket Clip Locations Step 3: Push the new DIMM module until it engages and the white plastic end clips click into place. Make sure the end clips are fully secured after installation. 7.5 Elevated Platform Removal The elevated platform supports the optical drive and the hard drive. It is not necessary to remove the optical drive bracket or hard drive bracket to remove the elevated platform.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 14” short depth server Step 3: Unfasten the elevated platform screws on the bottom panel (Figure 7-4). Figure 7-4: Bottom Panel Elevated Platform Screws Step 4: Unfasten the internal elevated platform screws (Figure 7-5). Figure 7-5: Internal Elevated Platform Screws Step 5: Slide the elevated platform out of the chassis. 7.6 PSU Module Replacement Please read the warnings at the beginning of Section 4.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 15-inch touch panel PC Figure 7-6: PSU Power Cables Step 4: Unfasten the screws on the inside panel (Figure 7-7). Figure 7-7: PSU Bottom Panel Retention Screws Step 5: Remove the retention screws that connect the PSU bracket to the chassis (Figure 7-8). Figure 7-8: PSU Rear Panel Screws Step 6: Remove the retention screws that connect the PSU to the PSU bracket. 102 661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.
PC 5172RMC 7152 17-inch sunlight readable touch panel PC 14” short depth serverRMC 7152 7.6.2 Install the New PSU 14” short depth server Installation is done in the reverse order to removal. To install a new PSU module, please follow the steps below. Step 1: Attach the PSU bracket to the PSU module with the previously removed retention screws. Step 2: Insert the PSU module and bracket assembly into the chassis and attach the PSU bracket to the chassis with the previously removed retention screws.
PC 5172 17-inch sunlight readable touch panel PC PC 5150 Step 4: Remove the system cooling fans retention screws from 15-inch the left panel (Figurepanel 7-10). touch PC Figure 7-10: System Cooling Fans Left Panel Retention Screws Step 5: Remove the system cooling fans from the chassis. 7.7.2 Install the New System Cooling Fans To install the new system cooling fans, please follow the steps below.
