KCP802/1602/3202 1U rackmount Combo Cat6 IP KVM Switch User Manual KCP802/1602/3202: 1U rackmount Combo Cat6 IP KVM switch 8/16/32-port RJ45 with 2 user console 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
KCP802/1602/3202 1U Rackmount Combo Cat6 IP KVM switch Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment. Safety Instructions Please read all of these instructions carefully before you use the device.
KCP802/1602/3202 1U rackmount Combo Cat6 IP KVM Switch Contents < Part 1 > Combo Cat6 KCP802 1.1 1.2 1.3 1.4 1.5 1.6 1.7 2-console KVM KCP1602 KCP3202 Package contents KVM port & Cat6 dongle connection IP & Local console connection IP console setting KVM Cascade IP Multi-port connection to remote PDU Specifications P.1 P.2 P.3 P.4 P.5 P.6 - 7 P.8 < Part 2 > Usage 2.1 2.2 2.3 2.4 2.
KCP802/1602/3202 1U Rackmount Combo Cat6 IP KVM switch Before Installation ¦ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ¦ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition.
Part 1. Combo Cat6 KVM < 1.
< 1.2 > KVM port & Cat6 dongle connection Combo Cat6 IP KVM USB Servers USB DVI-USB dongle CAT 5 / 6 cable max. 40 meters DVI-D Cat6 KVM port 32 31 30 24 23 22 29 21 28 27 26 25 16 15 14 13 12 11 10 9 20 19 18 17 8 7 6 5 4 3 2 1 PS/2 Servers USB Servers PS/2 VG A VGA-USB dongle VGA-PS/2 dongle CAT 5 / 6 cable max.
KCP802/1602/3202 1U rackmount Combo Cat6 IP KVM Switch < 1.3 > IP & Local console connection Combo Cat6 IP KVM Local USB console 32 31 30 29 24 23 22 21 CAT 5 / 6 cable max. 100m 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 28 20 27 26 25 16 15 14 13 12 11 10 9 19 18 17 8 7 6 5 4 3 2 1 Network device hub or router © Copyright 2013 Acnodes, Inc. All rights reserved.
KCP802/1602/3202 1U Rackmount Combo Cat6 IP KVM switch < 1.4 > IP console setting After the cable connection, please take the following steps to configure the IP KVM : 1. Download IPKVMsetup.exe 2. Double click IPKVMsetup.exe to configure the IP KVM by device setup as below. 3. Click Refresh Device to search the connected IP KVM 4. Select the M.A.C. address, which you want to setup, then click Query Device 5. Enter Super user login. The default is super 6. Enter Super user password. The default is pass 7.
< 1.5 > KVM Cascade ¦ ¦ Combo Cat6 IP KVM Cascade up to 8 levels, 256 servers Cascading multiple KVM with CBC-6 cascade cable. Cascaded KVMs from level 2 to 8 must be the models of KC801 / KC1601 / KC3201. When multiple combo Cat6 KVMs cascade together, the master KVM at level 1 will take all control of other slave KVM switches (e.g. level 2 to 8).
< 1.6 > IP Multi-port connection to remote PDU Combo Cat6 IP KVM IP KVM provides RJ-45 Multi port for the user to remotely control and manage servers & PDU together. Combo IP KVM 32 31 30 29 28 27 26 25 16 15 14 13 12 11 10 9 24 23 22 21 20 19 18 17 8 7 6 5 4 3 2 1 Other band IP KVM can NOT connect InfraPower PDU Each RJ-45 Multi port connect max. 16 pcs of InfraPower PDU To Multi port 1st level PDU To LINK port of the 1st PDU LINK 2nd level PDU CAT.
< 1.
< 1.
Part 2. Usage Combo Cat6 KVM Usage 2.1 KVM Button Power ON ¦ Turn off all servers and KVM switches ¦ Make sure all cables / connectors are properly connected ¦ Recommend Power ON sequence is monitor, KVM switch finally computer Front Panel - Port LED Indications 8 ports Bank no. PC port LEDs Channel button Bank button 16 ports 32 ports Bank no.
KCP802/1602/3202 1U Rackmount Combo Cat6 IP KVM switch 2.2 Combo Cat6 KVM Usage Password The password is enabled by default, the default password is “00000000” eight zeros (Do not use “0” on number pad) ¦ Enable password 1. Press the KVM hotkey Scroll Lock + S croll Lock + U 2. Logout the KVM by pressing the hotkey Scroll Lock + Scroll Lock + P 3. In SUPERVISOR level, enter “00000000” eight zeros in user nam e & password field (Do not use “0” on number pad) 4.
2.
2.4 KVM Hotkey & Remote Console Hotkey Combo Cat6 KVM Usage Local Console Hotkey Function Scroll Lock + Scroll Lock + Space Bar Calling OSD menu Right-button mouse + Esc Calling OSD menu Scroll Lock + Scroll Lock + Switch to previous port Scroll Lock + Scroll Lock + Switch to next port Scroll Lock + Scroll Lock + Scroll Lock + Scroll Lock + PgUp / PgDn Switch to previous bank or next bank Bank no. + Port no.
KCP802/1602/3202 1U rackmount Combo Cat6 IP KVM Switch 2.5 DC Power 12V, 24V, 48V Input Model Combo Cat6 KVM Usage 12V 24V 48V Input voltage: 12-Volt 24-Volt 48-Volt Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V Input rating Input current - No load 50 mA 50 mA 50 mA - Full load 4950 mA 2450 mA 1220 mA Output voltage: 12-Volt 12-Volt 12-Volt Output current: 4.16A 4.16A 4.
