User's Manual Super Slim PANEL PC FPC 8084

FPC 8084 Users Manual
A.2.1 Standard CMOS Setup
“ Standard CMOS Setup ” is use d to recor d some ba sic hardware
configurations in the computer system and set the system clock and
error handling. If the motherboard is already installed in a working
system, there is no need to enter this option. However, the Standard
CMOS option has to be setup in any of the following situations: the
system hardware configurations are changed, the onboard battery
fails, and the configuration stored in the CMOS memory is lost or
damaged.
Phoenix – Award BIOS CMOS Setup Utility
Standard CMOS Features
Date (mm:dd:yy) Wed, Aug 7 20 02 Ite m Help
Time (hh:mm:ss) 13 : 9 : 11
f IDE Primary Master None
Menu Level f
f IDE Primary Slave None Change the
f IDE Secondary Master None Day, month,
f IDE Secondary Slave None Year and
Century
Drive A 1.44M, 3.5 in.
LCD Type T9 800x600 TFT
Screen Expansion Enable
TV Type NTS CDisplay
Type During Post VGA Default
Display Type After Post VGA Default
Halt on All, But keyboar d
Base Memory 640K
Extended Memory 65535K
ÇÈ ÆÅ : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1:
General Help
F5 : Previous Values F6: Fail-Safe Defaults F7 : Optimized Defa ults
At the bottom of the menu are the control keys for the use of this
menu. The <F1> key can be pressed in each item field to display the
relevant information for help. The memory display at the lower
right-hand side of the menu is read-only. It will adjust automatically
36