APW 5260 26” Industrial Panel Mount Widescreen LCD User Manual APW5260: 26” industrial panel mount widescreen LCD monitor 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APW 5260 26” Industrial Panel Mount Widescreen LCD L eg al Inf orm ation F irst English printing, O ctober 2002 Information in this doc ument has been carefully checked for accuracy; howeve r, no guarantee is given to the correctness of the contents. T he information in this docum ent is subject to change without notice. W e are not liable for any injury or loss that results from the use of this equipm ent.
APW 5260 26” Industrial Panel Mount Widescreen LCD Contents < Part. 1 > APW 5260 1.1 1.2 1.3 Package Content Structure Diagram & Dimension Mounting Hardware & Installation P.1 P.2 - 3 P.4 - 5 < Part. 2 > Specifications / OSD / Remote Controller 2.1 2.2 2.3 Product Specifications On-screen Display Operation ( OSD ) Remote Controller ( RC-2 ) P.6 - 7 P.8 - 9 P.10 < Part. 3 > Options 3.1 3.2 3.3 3.4 3.5 3.
APW 5260 26” Industrial Panel Mount Widescreen LCD Before Installation ¦ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ¦ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition.
APW 5260 26” Industrial Panel Mount Widescreen LCD < Part 1 > < 1.1 > Package Content – APW 5260 APW 5260 26" widescreen LCD display X 1 6ft VGA cable X 1 Power cord X 1 Remote controller X 1 Wall-mount bracket set X 1 Standard I/O HDMI DVI-D Audio S-Video in 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 R CA Audio out VGA Power © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice.
APW 5260 26” Industrial Panel Mount Widescreen LCD < 1.2 > Structure Diagram - APW 5260 1 Front view 2 3 AP-W26 NAP-W26 7 Top view 4 1 Rear case 2 LCD panel 3 6mm aluminum front bazel 4 Audio speaker, pair 5 LCD membrane 6 Wall-mount bracket 7 Remote sensor Model APW5260 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 Rear view 5 6 Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight 678 x 58 x 426 mm 26.7 x 2.3 x 16.
APW 5260 26” Industrial Panel Mount Widescreen LCD < 1.2 > Dimension - APW 5260 Front View Side View AP-W26 NAP-W26 Rear View UNIT : mm 1mm = 0.03937 inch Bottom View 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
< 1.3 > Wall-mount Installation – APW 5260 Front wall-mount bracket Step 1 ¦ Install left & right front wall-mount brackets at the rear side of the LCD shown above. ¦ M5 screw x 8 pcs included ( Left & right side ). Rear side Rear wall-mount bracket Wall Step 2 ¦ Install left & right rear wall-mount brackets on the wall shown above. ¦ 6 x M10 screws required ( Left & right side ). M10 screw sets are not provided.
APW 5260 26” Industrial Panel Mount Widescreen LCD < 1.3 > VESA mount Installation – APW 5260 M6 screw VESA mount ( 100*100mm ) ¦ 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 Hardware and M6*8 pcs for VESA mount are not provided © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APW 5260 26” Industrial Panel Mount Widescreen LCD < Part 2 > < 2.1 > Product Specifications Mechanical Design APW 5260 Front Panel Black, RAL 9005 Rear Casing Dark grey, RAL 7037 VESA Mounting 100 x 100mm Other Mounting Panel m ount Protection LCD Panel 3mm protective glass Manufacturer Panel Size ( diagonal ) 26-inch Widescreen TFT color LCD Display pixel ( dots x lines ) 1366 x 768 Brightness ( typ. ) 350 Contrast Ratio ( typ. ) 1000:1 Color 16.
APW 5260 26” Industrial Panel Mount Widescreen LCD P ow er P ower S upp ly P ower Con sumption Rang e Auto- se nsing 1 00 to 240 VAC, 50 / 6 0Hz Scre en disp lay ON 44W or le ss Po we r saving mo de 9W or less Po we r butto n O FF 2W or less Regula tory Sa fe ty A ppro va l FCC & CE Environm ental Conditions Op eratin g Temp eratur e 0 to 50°C deg ree Hu midity 20~ 90 %, non -cond ensin g Temp eratur e -5 to 60°C deg ree Hu midity 5~ 90% , n on-co nde nsing S hock 10 G acceler ation
APW 5260 26” Industrial Panel Mount Widescreen LCD < 2.
APW 5260 26” Industrial Panel Mount Widescreen LCD < 2.
< 2.3 > Remote Controller ( RC-2 ) 1 8 2 INP UT 3 4 5 MUTE 1 2 3 4 5 6 7 8 9 AUTO 0 -/-- VOL 9 CH 10 F REE ZE 11 12 ME NU SE LECT AS P ECT 13 14 6 SL EEP EN TE R 15 16 7 BA CK 20 S OURCE SWAP EXIT PIP POS ITION PIP AU DIO 17 18 PIP 21 19 r 1 INPUT Select the source Switches on or off the TV 2 3 0-9 Only use in TV mode. Select channels. For channel numbers 10 and above, enter the second digit within two seconds.
APW 5260 26” Industrial Panel Mount Widescreen LCD < Part 3 > Options < 3.1 > Option Table Options APW PMW SDI *** Touchscreen MCS multi-screen control *** MIL-type / lockable connector TV *** The user can only select either SDI or MCS inputs. 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice.
APW 5260 26” Industrial Panel Mount Widescreen LCD < 3.2 > Options : 3G / HD / SD-SDI input Acnodes’ SDI input is an ideal solution for the broadcastgrade video and high resolution CCTV market. Designed for use with Full HD 1080p and ultra high resolution 1920 x 1200 LCD displays, Acnodes provides a SDI input module without using additional space or power and it comes standard with a 2-year warranty.
APW 5260 26” Industrial Panel Mount Widescreen LCD < 3 .3 > Optio ns : MCS MCS ( Multi-displa y Co ntrol ) M ore contro l is alw ays good. Especially when it is necessary and easy. Acnodes provides M C S solutio n to contro l th e O SD of variou s LCD display up to 64 units.
APW 5260 26” Industrial Panel Mount Widescreen LCD < 3.4 > Options : Touchscreen & driver 26" USB Touchscreen Specification Model TRB TCB e-Resistive e-Capacitive Technology 5-Wire Resistive Capacitive Touch Point Single Single Stylus or Finger Finger = 50g / Stylus=R0.8 = 50g 10 million touches 300 million touches 15 ms 20 ms 80% ± 3% 87% ±2% 3H 9H Haze 8% ± 3% 7% Glass 3.2 ±0.2 mm 2.
APW 5260 26” Industrial Panel Mount Widescreen LCD Please follow the below steps to setup the touch screen:Step 1. Run the bundled CD disc Step 2. Double click the Setup.exe Step 3. Follow the installation instruction to finish the setup Step 4. After installation, run the TouchKit program & the “4 point calibration” Please do the initial calibration after the first setup 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved.
APW 5260 26” Industrial Panel Mount Widescreen LCD < 3.5 > Options : MIL-type or Lockable Connector Input MIL - type Connector Part no. MIL Standard DC Power *** ( Male ) MS3470W8-33P MIL - DTL - 26482 VGA *** ( Male ) MS3470W14-15P MIL - DTL - 26482 *** There are several additional MIL DC and VGA connector types with varying design characteristics to meet cost considerations and to provide users with the most design flexibility possible. For more information, please contact us.
APW 5260 26” Industrial Panel Mount Widescreen LCD < 3.6 > Options : TV ( Analog ) TV HDMI DVI-D Audio S-Video in R C A Audio out VGA Power *** For RC-2 remote controller specifications, please refer to P.14 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
