APM 5200 20” Industrial Panel Mount LCD User Manual APM5200: 20” industrial panel mount LCD monitor 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APM 5200 20” Industrial Panel Mount LCD L eg al Inf orm ation F irst English printing, O ctober 2002 Information in this doc ument has been carefully checked for accuracy; howeve r, no guarantee is given to the correctness of the contents. T he information in this docum ent is subject to change without notice. W e are not liable for any injury or loss that results from the use of this equipm ent. Safet y Instru ctions Please read all of th ese in structio ns carefully before yo u use th e d evice.
APM 5200 20” Industrial Panel Mount LCD Contents < Part. 1 > APM 5200 1.1 1.2 1.3 Package Content Structure Diagram & Dimension Mounting Hardware & Installation P.1 P.2 - 3 P.4 - 5 < Part. 2 > Specifications / OSD 2.1 2.2 Product Specifications On-screen Display Operation ( OSD ) P. 6 - 7 P. 8 < Part. 3 > Options 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 Option Table 3G / HD / SD-SDI Broadcast-grade input MCS Multi-display control solution AD2.2 Upgrade : HDMI, S-Video + BNC & Audio AD3.
APM 5200 20” Industrial Panel Mount LCD Before Installation ¦ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ¦ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition.
APM 5200 20” Industrial Panel Mount LCD < Part 1 > < 1.1 > Package Content – APM 5200 APM 5200 20" LCD Display 20" LCD display X 1 6ft VGA cable X 1 Power adapter X 1 Power cord X 1 Mounting hardware X 1 pack - Mounting bracket x 4 pcs - M4* 6mm screw x 8 pcs - M4* 50mm screw x 8 pcs Standard I/O Power DVI-D VGA AD2.2 upgrade I/O Power BNC S-Video Audio VGA HDMI out - in - in Video PC AD3.
APM 5200 20” Industrial Panel Mount LCD < 1.2 > Structure Diagram - APM 5200 1 2 Front view 3 4 AP-20 NAP-20 5 7 Rear view 1 Rear case 2 LCD panel 3 Protective 3mm glass 4 6mm aluminum front bazel 5 Audio speaker ( for HDMI, Audio or TV option ) 6 LCD membrane 7 Remote sensor Model APM5200 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 6 Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight 513 x 72 x 392 mm 20.2 x 2.8 x 15.
< 1.2 > Dimension - APM 5200 Front View 20” LCD Display Side View AP-20 NAP-20 Rear View UNIT : mm 1mm = 0.
APM 5200 20” Industrial Panel Mount LCD < 1.3 > Panel Mount Installation – APM 5200 1 2 Mounting bracket M4*6mm screw 3 M4*50mm screw x 8 pcs x 4 pcs x 8 pcs Hardware set part no. UV-BK#2 Steps ¦ ¦ 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 Install 4 mounting brackets with 8 x M4*6mm screws Adjust the LCD panel with 8 x M4*50mm screws and fix it on the surface. © Copyright 2013 Acnodes, Inc. All rights reserved.
APM 5200 20” Industrial Panel Mount LCD < 1.3 > VESA mount Installation – APM 5200 20” LCD Display M4 screw VESA mount ( 100*100mm ) ¦ 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 Hardware and M4*4 pcs for VESA mount are not provided © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
APM 5200 20” Industrial Panel Mount LCD < Part 2 > < 2.1 > Product Specifications Mechanical Design APM 5200 Front Panel Black, RAL 9005 Rear Casing Dark grey, RAL 7037 VESA Mounting 100 x 100mm Other Mounting Panel mount Protection LCD Panel 3mm protective glass Manufacturer Panel Size ( diagonal ) 20-inch TFT color LCD Display pixel ( dots x lines ) 1600 x 1200 Brightness ( typ. ) 300 Contrast Ratio ( typ. ) 800:1 Color 16.
APM 5200 20” Industrial Panel Mount LCD Environmental Conditions Operating Storage Physical Specification Temperature 0 to 50°C degree Humidity 20~90%, non-condensing Temperature -5 to 60°C degree Humidity 5~90%, non-condensing Shock 10G acceleration (11ms duration) Vibration 5~500Hz 1G RMS random Product ( W x D x H ) 513 x 72 x 392 mm Packing ( W x D x H ) 20.2 x 2.8 x 15.4 inch 651 x 124 x 597 mm 25.6 x 4.9 x 23.5 inch Applicable Format Net Weight 6 kgs / 13.
< 2.
APM 5200 20” Industrial Panel Mount LCD < Part 3 > Options 20” LCD Display < 3.1 > Option Table Options APM PM SDI *** HDMI * or DVI-D S-Video * + Composite ( BNC ) Audio Touchscreen MCS multi-display control *** DC Power MIL-type / lockable connector Quad display TV ( Analog ) * *** About SDI and MCS ( 1 ) The user can only select either SDI or MCS inputs. ( 2 ) For SDI input, the AD board will be upgraded to version 3.
APM 5200 20” Industrial Panel Mount LCD < 3.2 > Options : 3G / HD / SD-SDI input Acnodes ’ SDI input is an ideal solution for the broadcast- grade video and high resolution CCTV market. Designed for use with Full HD 1080p and ultra high resolution 1920 x 1200 LCD displays, Acnodes provides a SDI input module without using additional space or power and it com es standard with a 2- year warranty.
< 3.3 > Options : MCS 20” LCD Display MCS ( Multi-display Control ) More control is always good. Especially when it is necessary and easy. Acnodes provides MCS solution to control the OSD of various LCD display up to 64 units. The RS-232C is used for the communication between the PC and the first display via a 15 feet serial cable while the CAN bus is used for the various LCD displays cascade together via CAT 5/6 cable, and daisy chain up to 1,000 meters.
< 3.4 > AD2.2 Upgrade Options : - HDMI - S-Video + BNC - Audio Power BNC S-Video Audio out - in - in Video PC VGA HDMI AV : S-Video + Composite (BNC) HDMI : HDMI 1.1, CEA-861-D Audio : 3.5mm audio jacks for audio in & out, and 2W + 2W speakers *** AD2.2 upgrade option comes with RC-1 remote controller x 1. 5 1 2 3 6 7 4 8 9 1 POWER Switches on or off the TV 2 MUTE Turn on or off the speaker 3 AV Switch to AV mode 4 0- 9 Select channels.
APM 5200 20” Industrial Panel Mount LCD < 3.5 > AD3.0 Upgrade Options : 20” LCD Display - HDMI - DVI-D - S-Video + BNC - Audio Power BNC S-Video Audio out - in in Video PC AV HDMI DVI-D Audio DVI-D VGA HDMI : S-Video + Composite (BNC) : HDMI 1.1, CEA-861-D : DVI-D TMDS single link : 3.5mm audio jacks for audio in & out, and 2W + 2W speakers *** ( 1 ) AD3.0 upgrade option comes with RC-2 remote controller x 1, please refer to P.
APM 5200 20” Industrial Panel Mount LCD < 3.6 > Options : Touchscreen & driver 20" USB Touchscreen Specification Model TRB e-Resistive Technology 5-Wire Resistive Touch Point Single Method Activation Force Stylus or Finger = 50g / Stylus=R0.8 Durability 35 million touches Response Time 15 ms Optical Transmittance 80% ± 3% Surface Hardness Haze 8% ± 3% Glass 3.2 ±0.
APM 5200 20” Industrial Panel Mount LCD Please follow the below steps to setup the touch screen:Step 1. Run the bundled CD disc Step 2. Double click the Setup.exe Step 3. Follow the installation instruction to finish the setup Step 4. After installation, run the TouchKit program & the “4 point calibration” Please do the initial calibration after the first setup 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved.
APM 5200 20” Industrial Panel Mount LCD < 3.7 > Options : DC Power Model 12V 20” LCD Display 24V 48V Input rating Input voltage: 12-Volt 24-Volt 48-Volt Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V - No load 50 mA 50 mA 50 mA - Full load 4950 mA 2450 mA 1220 mA Output voltage: 12-Volt 12-Volt 12-Volt Output current: 4.16A 4.16A 4.16A Efficiency 84% 85% 85% Input current Output rating 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.
APM 5200 20” Industrial Panel Mount LCD < 3.8 > Options : MIL-type or Lockable Connector Input MIL - type Connector Part no. MIL Standard DC Power *** ( Male ) MS3470W8-33P MIL - DTL - 26482 VGA *** ( Male ) MS3470W14-15P MIL - DTL - 26482 *** There are several additional MIL DC and VGA connector types with varying design characteristics to meet cost considerations and to provide users with the most design flexibility possible. For more information, please contact us.
< 3.9 > Options : Quad Display 20” LCD Display QD Specification Item Model Number Description QD (NTSC) QD (PAL) Number of Color 16.7 M 16.7 M Imaging System NTSC PAL 1024 x 525 1024 x 625 60 50 Resolution Refresh Rate Video Input Video Output Camera Input 1.0 Vpp, 75 Ohm x 4 VCR Input 1.0 Vpp, 75 Ohm x 1 Live Monitor 1.0 Vpp, 75 Ohm x 1 Loop Through Out 1.0 Vpp, 75 Ohm x 4 VCR Output 1.
APM 5200 20” Industrial Panel Mount LCD < 3.10 > Options : TV ( Analog ) TV Power BNC S-Video Audio out - in - in Video PC *** VGA HDMI For TV option : ( 1 ) The AD board comes standard with HDMI, VGA, S-Video, BNC, audio inputs and RC-2 remote controller. ( 2 ) Casing dimensions will be changed. 14628 Central Ave, Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice.
How to Use RC-2 Remote Controller 1 8 2 INP UT 3 4 5 MUTE 1 2 3 4 5 6 7 8 9 AUTO 0 -/-- VOL 9 CH 10 F REE ZE 11 12 ME NU SE LECT AS P ECT 13 14 6 SL EEP EN TE R 15 16 7 BA CK 20 S OURCE SWAP EXIT PIP POS ITION PIP AU DIO 17 18 PIP 21 19 r 1 INPUT Select the source Switches on or off the TV 2 3 0-9 Only use in TV mode. Select channels. For channel numbers 10 and above, enter the second digit within two seconds.
